Recalls by Model
STEEL WHEEL FRACTURE
Summary
FORD SPECIAL SERVICE VEHICLE (SSV) EXPEDITIONS USE A STEEL FULL FACE WHEEL DESIGN SIMILAR TO THAT INVESTIGATED IN PE03009, RQ04007, EA04034 (CROWN VICTORIA POLICE INTERCEPTOR) AND PE03026 (GM PICKUPS AND SUVS).A TOTAL OF 8,251 SSVS (2.2% OF TOTAL PRODUCTION) WERE PRODUCED WITHIN MODEL YEARS 2004-2006 AND SOLD PRIMARILY FOR USE BY STATE, FEDERAL, AND MUNICIPAL LAW ENFORCEMENT (LE) AGENCIES.FORD STIPULATES THAT THE SUBJECT VEHICLES ARE NOT SUITABLE FOR HIGH SPEED OR PURSUIT OPERATIONS AND ALSO IDENTIFIED A 2004 NATIONAL INSTITUTE FOR JUSTICE VEHICLE EVALUATION REPORT WHICH ALSO ACKNOWLEDGES THIS LIMITATION. THE FULL FACE WHEEL IS FABRICATED FROM TWO PIECES: A STAMPED OUTER WHEEL DISC AND A FORMED RIM.THE TWO PIECES, WHICH TOGETHER COMPRISE THE OUTER BEAD SEAT, ARE JOINED TOGETHER WITH A CIRCUMFERENTIAL WELD.A CYCLIC BENDING MOMENT OCCURS IN THE OUTER BEAD SEAT AREA AS THE WHEEL ROTATES, RESULTING IN FATIGUE STRESSES IN THE WELD'S HEAT AFFECTED ZONE THAT CAN LEAD TO FRACTURING (CRACKING) OF THE RIM MATERIAL.BECAUSE THE FAILURE OCCURS UNDER THE OUTBOARD TIRE BEAD, AIR LEAKAGE MAY NOT READILY OCCUR WHEN THE RIM CRACKS, DEPENDENT ON HOW WELL THE BEAD SEALS ON THE RIM.IF MULTIPLE CRACKS GROW UNDETECTED AND SUDDENLY JOIN INTO A SINGLE LARGE CRACK, THE WHEEL'S STRUCTURE CAN BECOME COMPROMISED LEADING TO RAPID AIR LOSS.A RAPID AIR LOSS, ESPECIALLY AT HIGHER SPEED, MAY LEAD TO A CRASH. FORD RESPONDED TO ODI'S JANUARY 5, 2009 INFORMATION REQUEST (IR) ON FEBRUARY 24.FORD'S RESPONSE ACKNOW…