2009 Kenworth T600 recalls and problems

The 2009 Kenworth T600 has 5 recalls and 0 owner complaints on file with NHTSA.

How the 2009 compares

Too few model years with complaints to compare.

5recalls

0complaints

0crashes

0fires

0injuries

—median miles

Owner complaints filed with NHTSA, not verified and not adjusted for sales. Ranking compares this model's own years only.

Does your car have an open recall?
Recalls apply to specific vehicles. Only a VIN lookup on NHTSA's official site shows whether yours is affected and still unrepaired.

Check your VIN →

5 recalls

Engine

Mar 24, 2011 · NHTSA campaign 11V203000 · 5,831 vehicles

Problem: Paccar is recalling certain model year 2007-2011 Kenworth C500, T2000, T600, and T660, as well as model year 2009-2011 Peterbilt 387 and 388 trucks equipped with caterpillar C15 engine and manufactured from May 11, 2006, through September 17, 2010. Degradation of a combustion tube weld can cause radial heat impingement on the body which May burn through certain bodies used on C15 engines.

Original NHTSA wording

PACCAR IS RECALLING CERTAIN MODEL YEAR 2007-2011 KENWORTH C500, T2000, T600, AND T660, AS WELL AS MODEL YEAR 2009-2011 PETERBILT 387 AND 388 TRUCKS EQUIPPED WITH CATERPILLAR C15 ENGINE AND MANUFACTURED FROM MAY 11, 2006, THROUGH SEPTEMBER 17, 2010. DEGRADATION OF A COMBUSTION TUBE WELD CAN CAUSE RADIAL HEAT IMPINGEMENT ON THE BODY WHICH MAY BURN THROUGH CERTAIN BODIES USED ON C15 ENGINES.

Risk: This could result in a fire.

Original NHTSA wording

THIS COULD RESULT IN A FIRE.

Remedy & notes

Caterpillar is handling the owner notification and remedy for this campaign. Please see caterpillar's defect report 11E-006. Caterpillar will replace the single piece combustion tube with a thick wall combustion tube which will not allow the heat to break through. This service will be performed free of charge. Due to a parts supply issue, owners will be notified by the end of April 2011 about the safety defect, and will then be notified again once the free remedy is available, currently estimated to be around late July 2011. Owners May contact caterpillar toll-free at 1-800-447-4986.

Kenworth safety recall no. 11KWB & Peterbilt safety recall no. 0311-A.owners May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .

Service Brakes

Jun 30, 2009 · NHTSA campaign 09V239000 · 3,423 vehicles

Problem: Kenworth is recalling 3,423 my 2004-2009 T2000, T800,T600, W900 and T660 vehicles. Increased brake excitation in a certain vehicle configuration which includes bendix drum brakes, wide base low profile single tires, and an AG400 or AG460 rear suspension, due to its unique brake clocking and cam tube length, can cause fatigue and cracking to brake assembly components.

Original NHTSA wording

KENWORTH IS RECALLING 3,423 MY 2004-2009 T2000, T800,T600, W900 AND T660 VEHICLES. INCREASED BRAKE EXCITATION IN A CERTAIN VEHICLE CONFIGURATION WHICH INCLUDES BENDIX DRUM BRAKES, WIDE BASE LOW PROFILE SINGLE TIRES, AND AN AG400 OR AG460 REAR SUSPENSION, DUE TO ITS UNIQUE BRAKE CLOCKING AND CAM TUBE LENGTH, CAN CAUSE FATIGUE AND CRACKING TO BRAKE ASSEMBLY COMPONENTS.

Risk: Cracking can cause a complete fracture of the cam tube, which could increase stopping distance and decrease parking brake hold capability.

Original NHTSA wording

CRACKING CAN CAUSE A COMPLETE FRACTURE OF THE CAM TUBE, WHICH COULD INCREASE STOPPING DISTANCE AND DECREASE PARKING BRAKE HOLD CAPABILITY.

Remedy & notes

Dealers will inspect the rear axle brakes assembly, replace cracked rear axle brakes assembly components where required, and install cam tube support brackets on all rear axle wheel ends free of charge. The recall is expected to begin or before July 25, 2009. Owner May contact Kenworth at 1-425-828-5440.

Paccar recall no. 09KW7.owners May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .

Suspension

Sep 24, 2008 · NHTSA campaign 08V485000 · 130 vehicles

Problem: Paccar is recalling 130 my 2004-2009 T2000, T800, T600, W900 and T660 Kenworth trucks built with an AG400 rear suspension, long stroke brake chambers, and wide base tires (super singles). These vehicles May develop an increase in lateral and vertical axle movement. This movement May cause part or parts of the brake assembly (brake cam tube support, brake chamber bracket, brake chamber, brake spider) to develop fatigue cracks, possibly resulting in the failure of the part or parts within the brake assembly.

Original NHTSA wording

PACCAR IS RECALLING 130 MY 2004-2009 T2000, T800, T600, W900 AND T660 KENWORTH TRUCKS BUILT WITH AN AG400 REAR SUSPENSION, LONG STROKE BRAKE CHAMBERS, AND WIDE BASE TIRES (SUPER SINGLES). THESE VEHICLES MAY DEVELOP AN INCREASE IN LATERAL AND VERTICAL AXLE MOVEMENT. THIS MOVEMENT MAY CAUSE PART OR PARTS OF THE BRAKE ASSEMBLY (BRAKE CAM TUBE SUPPORT, BRAKE CHAMBER BRACKET, BRAKE CHAMBER, BRAKE SPIDER) TO DEVELOP FATIGUE CRACKS, POSSIBLY RESULTING IN THE FAILURE OF THE PART OR PARTS WITHIN THE BRAKE ASSEMBLY.

Risk: A failure May reduce vehicle brake performance, increasing the risk of a crash.

Original NHTSA wording

A FAILURE MAY REDUCE VEHICLE BRAKE PERFORMANCE, INCREASING THE RISK OF A CRASH.

Remedy & notes

Dealers will install the cam tube support brackets on all of the rear axle wheel ends. Inspect the rear axle brake assembly and replace it if cracked. The recall is expected to begin during November 2008. Owners May contact Kenworth at 1-425-828-5440.

Kenworth recall no. 08KWB. Customers May contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

Engine

Sep 23, 2008 · NHTSA campaign 08V487000 · 4,883 vehicles

Problem: Paccar is recalling 4,883 my 2006-2009 Kenworth T600, T660, T800, W900, T2000 and my 2008-2009 Peterbilt 365, 367, 379, 384, 386, 387, 388 and 389 trucks. Inadequate stiffness of the diesel particulate filter (DPF) bracket could result in separation of the DPF from the chassis.

Original NHTSA wording

PACCAR IS RECALLING 4,883 MY 2006-2009 KENWORTH T600, T660, T800, W900, T2000 AND MY 2008-2009 PETERBILT 365, 367, 379, 384, 386, 387, 388 AND 389 TRUCKS. INADEQUATE STIFFNESS OF THE DIESEL PARTICULATE FILTER (DPF) BRACKET COULD RESULT IN SEPARATION OF THE DPF FROM THE CHASSIS.

Risk: A vehicle crash could occur if another vehicle strikes the DPF on the roadway.

Original NHTSA wording

A VEHICLE CRASH COULD OCCUR IF ANOTHER VEHICLE STRIKES THE DPF ON THE ROADWAY.

Remedy & notes

Paccar is working with caterpillar to repair these vehicles (please see 08E041). Owners May contact caterpillar at 1-800-447-4986 or Kenworth at 1-425-828-5440 or Peterbilt at 1-940-591-4196.

Kenworth recall no. 08KWD and Peterbilt recall no. 908G.customers May contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

Suspension

Jul 14, 2008 · NHTSA campaign 08V314000 · 1,189 vehicles

Problem: Kenworth is recalling 1,189 my 2009 T2000, T600, T660, T800 and W900 trucks. The axle u-bolts attaching the axle to the drive beam on certain AG380 rear suspensions May have received insufficient fastener torque during the installation process.

Original NHTSA wording

KENWORTH IS RECALLING 1,189 MY 2009 T2000, T600, T660, T800 AND W900 TRUCKS. THE AXLE U-BOLTS ATTACHING THE AXLE TO THE DRIVE BEAM ON CERTAIN AG380 REAR SUSPENSIONS MAY HAVE RECEIVED INSUFFICIENT FASTENER TORQUE DURING THE INSTALLATION PROCESS.

Risk: The insufficient torque May allow the axle u-bolt to loosen if undetected, could impact long term suspension performance and increase the risk of a crash.

Original NHTSA wording

THE INSUFFICIENT TORQUE MAY ALLOW THE AXLE U-BOLT TO LOOSEN IF UNDETECTED, COULD IMPACT LONG TERM SUSPENSION PERFORMANCE AND INCREASE THE RISK OF A CRASH.

Remedy & notes

Dealers will have the axle u-bolt on the affected chassis re-torqued to factory specifications free of charge. The recall began on August 12, 2008. Owners May contact Kenworth at 425-828-5440.

Kenworth recall no. 08KW9.customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Recall text as published by NHTSA and the manufacturer.

NHTSA investigations

Driveshaft separates from tractor

PE10029 · opened Aug 2, 2010 · closed Dec 23, 2010 · led to recall 10V634000

Summary

SummaryOn July 13, 2010, the Office of Defects Investigations (ODI) opened an investigation on model year (MY) 2007-2009 Peterbilt tractors equipped with the (SPL170XL extended lube inter-axle driveline).ODI opened this investigation based on one Vehicle Owners Questionnaire (VOQ) and certain Peterbilt field reports.During the course of the investigation, ODI reviewed PACCAR's IR (October 22, 2010) response with associated data related to Warranty and complaint information, mined field data, interviewed customers and visited local dealers within the Washington Metropolitan area.PACCARconducted testing regarding torsional loading and identified various causative factors contributed to this safety defect finding.The Defect is a consequence of the bearing surfaces of the SPL170XL extended lube universal joint that attaches the inter-axle driveline to the drive axle becoming prematurely worn due to a breakdown of lubrication and/or excessive heat.Prematurely worn bearing surfaces may result in the u-joint becoming loose and/or binding.This condition may result in universal joint failure, allowing the inter-axle driveline to detach from the axle, which may cause the drive shaft to separate from the vehicle, increasing the risk of personal injury or property damage hazard.ODI learned that the affected population of the alleged defect extended to peer models within PACCAR.In summary, the following vehicles are being recalled: MY 2007 and 2008 Kenworth trucks, models T600, T660, T200…

2009 vs. other Kenworth T600 years

Owner complaints by model year; the darker bar is the 2009. Click a bar to switch year.

Questions

Does the 2009 Kenworth T600 have recalls?

Yes — NHTSA lists 5 recall campaigns covering the 2009 Kenworth T600, the latest from Mar 24, 2011 (engine). A recall applies to specific vehicles: enter your VIN at nhtsa.gov/recalls to see whether yours is affected and still open.

What are the most common problems with the 2009 Kenworth T600?

Few complaints have been filed with NHTSA for the 2009 Kenworth T600.