2019 Chrysler Pacifica Plug-In Hybrid recalls and problems

On July 22, 2022, the Office of Defects Investigation (ODI) opened investigation PE22-008 regarding complaints alleging a loss of motive power condition potentially due to a transmission malfunction in Model Years 2019-2021 Chrysler Pacifica Plug-In Hybrid Electric Vehicles (PHEV).  On January 17, 2023, Fiat Chrysler Automobiles (FCA) issued safety recall (NHTSA Recall 23V-010) involving 2017-2023 Model Years (MY) Pacifica Plug-In Hybrid Electric Vehicles (PHEV) produced between August 12, 2016, through January 9, 2023. The recall states that the loss of motive power condition in these vehicles is caused by an internal transmission wiring connector that may short circuit, resulting in an unexpected engine shutdown.  An unexpected engine shutdown can cause a loss of drive power, increasing the risk of a crash.  In discussions with FCA on Recall 23V-010, ODI confirmed the recall was related to investigation PE22-008.  The remedy for 23V-010 is to update the Power Inverter module (PIM) and/or Instrument Panel Cluster (IPC) software to provide drivers a message stating “Stop Safely - Vehicle Will Shut Off Soon” followed by a chime and MIL, PRNDL blinking (on cluster and shifter knob), low SOC (State of Charge) warning and reduced power mode.  The recall remedy does not replace the defective hardware that was described in Recall 23V-010, and the wiring connector short still exists on these vehicles. To date, ODI has received 132 reports for the population of vehicles subj…

On July 22, 2022, the Office of Defects Investigation (ODI) opened PE22008 to investigate allegation of loss of motive power, potentially due to transmission malfunction, in certain Chrysler Pacifica vehicles. In a January 17, 2023 letter to NHTSA, Fiat Chrysler Automobiles (FCA) submitted recall notice 23V-010 involving a transmission motor wiring defect in 67,118 model year (MY) 2017-2023 Chrysler Pacifica plug-in hybrid electric vehicles (PHEVs) manufactured from August 12, 2016 through January 9, 2023. FCA determined that an internal transmission connector short could result in an unexpected engine shutdown under certain conditions. Follow up correspondence with FCA confirmed this defect results in an electric motor position trouble code that was the basis for opening PE22008, therefore NHTSA is closing this investigation. The 23V-010 recall remedy is a software update to address the hardware failure associated with PE22008. When a hardware failure is detected, the vehicle limits motive power while instructing the driver to pull over to a safe location. NHTSA is concerned that drivers will pull over to an unsafe location when the warning message associated with the recall remedy displays on the dashboard. Due to the nature of the recall remedy and related reports, NHTSA has opened Recall Query RQ24004 to assess the recall remedy. The reports and failure report summary values included with this closing action are related to allegations of Recall 23V-010 remedy inadequacy. …