2006 Freightliner Columbia recalls and problems

The 2006 Freightliner Columbia has 21 recalls and 14 owner complaints on file with NHTSA; the most reported problem area is engine.

2005 Freightliner Columbia
Pictured: a 2005 model; the 2006 may differ in details. Photo: 2005 Freightliner Columbia by Elise240SX, CC BY-SA 4.0, via Wikimedia Commons
How the 2006 compares
Fewest complaintsMost complaints

Highest complaint count among 11 Columbia model years — 2nd most.

21recalls
14complaints
1crashes
2fires
5injuries
60,694median miles

Owner complaints filed with NHTSA, not verified and not adjusted for sales. Ranking compares this model's own years only.

Does your car have an open recall?
Recalls apply to specific vehicles. Only a VIN lookup on NHTSA's official site shows whether yours is affected and still unrepaired.
Check your VIN →

21 recalls

Exterior Lighting

Apr 14, 2020 · NHTSA campaign 20V214000 · 63,175 vehicles

Problem: Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk: The vehicle's rearward visibility may be reduced, increasing the risk of a crash.

Remedy & notes

DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Service Brakes

May 14, 2019 · NHTSA campaign 19V370000 · 741 vehicles

Problem: Daimler Trucks North America LLC (DTNA) is recalling certain 2004-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Columbia, Classic, FL80, FLD 120SD, Business Class M2, Western Star 4700, 4900, 6900, Sterling Acterra, L7500, LT7500, L8500, LT8500, L9500, and LT9500 vehicles. The vehicles may have an insufficient service brake air reservoir capacity. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."

Risk: An insufficient air reservoir volume may reduce brake effectiveness, increasing the risk of crash.

Remedy & notes

DTNA will notify owners, and dealers will add air reservoir capacity to the affected vehicles. Owner letters were mailed on November 29, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-815.

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Equipment

Dec 15, 2017 · NHTSA campaign 17V810000 · 24,860 vehicles

Problem: Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Freightliner Cascadia, Century Class, Columbia and Coronado trucks and Western Star 4700, 4900, 5700, 5900 and 6900 trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf

Risk: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

Remedy & notes

DTNA will notify owners, and instruct them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on April 11, 2018. Owners may contact DTNA customer service at 1-800-547-0712, or contact Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. DTNA's number for this recall is FL-759.

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Engine

Feb 28, 2012 · NHTSA campaign 12V074000 · 103,437 vehicles

Problem: Daimler trucks (dtna) is recalling certain model year 2006-2013 Freightliner, sterling, and western star vehicles, equipped with detroit diesel EPA07 and EPA10, DD13 and DD15/16 engines, manufactured from January 20, 2006, through February 20, 2012. The pump to rail high pressure fuel line support system used on these engines is sensitive to assembly torque and May be damaged during service work. As a result of other repairs, the line supports May loosen, potentially leading to fuel line cracking and a fuel leak.

Original NHTSA wording

DAIMLER TRUCKS (DTNA) IS RECALLING CERTAIN MODEL YEAR 2006-2013 FREIGHTLINER, STERLING, AND WESTERN STAR VEHICLES, EQUIPPED WITH DETROIT DIESEL EPA07 AND EPA10, DD13 AND DD15/16 ENGINES, MANUFACTURED FROM JANUARY 20, 2006, THROUGH FEBRUARY 20, 2012. THE PUMP TO RAIL HIGH PRESSURE FUEL LINE SUPPORT SYSTEM USED ON THESE ENGINES IS SENSITIVE TO ASSEMBLY TORQUE AND MAY BE DAMAGED DURING SERVICE WORK. AS A RESULT OF OTHER REPAIRS, THE LINE SUPPORTS MAY LOOSEN, POTENTIALLY LEADING TO FUEL LINE CRACKING AND A FUEL LEAK.

Risk: A fuel leak could create a road hazard, increasing the risk of a crash. Also a fuel leak in the presence of an ignition source can result in a fire.

Original NHTSA wording

A FUEL LEAK COULD CREATE A ROAD HAZARD, INCREASING THE RISK OF A CRASH. ALSO A FUEL LEAK IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE.

Remedy & notes

Dtna will notify owners, and where necessary, the high pressure fuel line support system will be replaced by dtna authorized service facilities, free of charge. The safety recall began on April 27, 2012. Owners May contact dtna at 1-800-547-0712.

Dtna's recall campaign number is 12C-2.customers May contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

Steering

Oct 13, 2011 · NHTSA campaign 11V514000 · 9,689 vehicles

Problem: Daimler trucks is recalling certain model year 2005-2011 Freightliner cascadia, columbia, century, coronado, and classic xl trucks manufactured from November 1, 2004, through June 15, 2010 for the rack and pinion steering system. The lower pinion bearing May corrode and fail. A failed bearing May lead to damage of the spool valve seals. A damage spool valve seal May allow hydraulic fluid to flow to the right or left turn port instead of flowing to the return port.

Original NHTSA wording

DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2005-2011 FREIGHTLINER CASCADIA, COLUMBIA, CENTURY, CORONADO, AND CLASSIC XL TRUCKS MANUFACTURED FROM NOVEMBER 1, 2004, THROUGH JUNE 15, 2010 FOR THE RACK AND PINION STEERING SYSTEM. THE LOWER PINION BEARING MAY CORRODE AND FAIL. A FAILED BEARING MAY LEAD TO DAMAGE OF THE SPOOL VALVE SEALS. A DAMAGE SPOOL VALVE SEAL MAY ALLOW HYDRAULIC FLUID TO FLOW TO THE RIGHT OR LEFT TURN PORT INSTEAD OF FLOWING TO THE RETURN PORT.

Risk: The steering could unexpectedly turn left or right, making the vehicle more difficult to control and increasing the risk of a crash.

Original NHTSA wording

THE STEERING COULD UNEXPECTEDLY TURN LEFT OR RIGHT, MAKING THE VEHICLE MORE DIFFICULT TO CONTROL AND INCREASING THE RISK OF A CRASH.

Remedy & notes

Daimler trucks will inspect the lower bearing for corrosion. If corrosion is found, the rack and pinion system will be replaced. If no corrosion is found, on the bearing, the bearing will be packed with grease and the rubber bellows will be replaced with sealant added between the bellows and the rack housing. An interim letter was mailed in December 2011. Owners May contact daimler trucks toll-free at 1-800-547-0712.

Daimler trucks' safety recall number is fl-614.owners May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .

Fuel System

Sep 16, 2011 · NHTSA campaign 11V478000 · 73,500 vehicles

Problem: Daimler trucks is recalling certain model year 2004 through 2008 heavy trucks manufactured from July 11, 2003, through September 28, 2007, equipped with EPA04 model MBE4000 engines built with plastic low pressure fuel lines and fuel filters mounted near the center of the engine on the left-hand side. The plastic low pressure fuel line between engine mounted fuel filter and engine block May develop a substantial diesel fuel leak.

Original NHTSA wording

DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2004 THROUGH 2008 HEAVY TRUCKS MANUFACTURED FROM JULY 11, 2003, THROUGH SEPTEMBER 28, 2007, EQUIPPED WITH EPA04 MODEL MBE4000 ENGINES BUILT WITH PLASTIC LOW PRESSURE FUEL LINES AND FUEL FILTERS MOUNTED NEAR THE CENTER OF THE ENGINE ON THE LEFT-HAND SIDE. THE PLASTIC LOW PRESSURE FUEL LINE BETWEEN ENGINE MOUNTED FUEL FILTER AND ENGINE BLOCK MAY DEVELOP A SUBSTANTIAL DIESEL FUEL LEAK.

Risk: This could create a road hazard increasing the risk of a crash. Fuel leakage, in the presence of an ignition source, could result in a fire.

Original NHTSA wording

THIS COULD CREATE A ROAD HAZARD INCREASING THE RISK OF A CRASH. FUEL LEAKAGE, IN THE PRESENCE OF AN IGNITION SOURCE, COULD RESULT IN A FIRE.

Remedy & notes

Daimler trucks will notify owners and the remedy will be performed by detroit diesel corporation authorized repair facilities. Vehicles will be inspected and the plastic low pressure fuel line will be replaced with a steel low pressure fuel line. This service will be performed free of charge. An interim letter was mailed to owners on October 28, 2011. The safety recall began on February 21, 2012. Owners May contact daimler trucks at 1-800-547-0712.

Daimler trucks' campaign number is 11C-2.owners May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .

Electronic Stability Control

Sep 8, 2011 · NHTSA campaign 11V465000 · 4,444 vehicles

Problem: Daimler trucks is recalling certain model year 2006-2012 Freightliner business class M2, cascadia, century, columbia, coronado and sterling a-line vehicles built with meritor wabco electronic stability control (ESC) system manufactured from September 15, 2005 through September 1, 2011. Under certain road and driving conditions, vehicle body roll and road inclination characteristics May adversely affect the slip angle calculation of the electronic stability control (ESC) system. This might cause the ESC to perceive an over steering situation and therefore apply the outer wheel brake on the front axle until the vehicle is perceived to be stable.

Original NHTSA wording

DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2006-2012 FREIGHTLINER BUSINESS CLASS M2, CASCADIA, CENTURY, COLUMBIA, CORONADO AND STERLING A-LINE VEHICLES BUILT WITH MERITOR WABCO ELECTRONIC STABILITY CONTROL (ESC) SYSTEM MANUFACTURED FROM SEPTEMBER 15, 2005 THROUGH SEPTEMBER 1, 2011. UNDER CERTAIN ROAD AND DRIVING CONDITIONS, VEHICLE BODY ROLL AND ROAD INCLINATION CHARACTERISTICS MAY ADVERSELY AFFECT THE SLIP ANGLE CALCULATION OF THE ELECTRONIC STABILITY CONTROL (ESC) SYSTEM. THIS MIGHT CAUSE THE ESC TO PERCEIVE AN OVER STEERING SITUATION AND THEREFORE APPLY THE OUTER WHEEL BRAKE ON THE FRONT AXLE UNTIL THE VEHICLE IS PERCEIVED TO BE STABLE.

Risk: If the driver is slow to react during this ESC intervention, the vehicle May deviate from the intended line of travel increasing the risk of a crash.

Original NHTSA wording

IF THE DRIVER IS SLOW TO REACT DURING THIS ESC INTERVENTION, THE VEHICLE MAY DEVIATE FROM THE INTENDED LINE OF TRAVEL INCREASING THE RISK OF A CRASH.

Remedy & notes

Daimler trucks will notify owners, and dealers will replace the ESC module with the appropriate software version as necessary, free of charge. An interim owner notification will be mailed on or about November 21, 2011. The date for availability of the final remedy is subject to validation testing and parts availability. The safety recall began on March 28, 2012. Owners May contact daimler trucks toll-free at 1-800-547-0712.

Daimler safety recall number is fl-612.owners May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .

Engine

Mar 3, 2011 · NHTSA campaign 11V146000 · 2,073 vehicles

Problem: Daimler trucks (dtna) is recalling certain model year 2006 through 2011 Freightliner, cascadia, century, columbia fld, and M2, sterling 9500, and western star 4900 heavy trucks manufactured from March 20, 2006, through June 30, 2010, equipped with specific MBE4000 EPA07 model engines. The intake air grid heater May short circuit and fail due to excessive internal temperatures.

Original NHTSA wording

DAIMLER TRUCKS (DTNA) IS RECALLING CERTAIN MODEL YEAR 2006 THROUGH 2011 FREIGHTLINER, CASCADIA, CENTURY, COLUMBIA FLD, AND M2, STERLING 9500, AND WESTERN STAR 4900 HEAVY TRUCKS MANUFACTURED FROM MARCH 20, 2006, THROUGH JUNE 30, 2010, EQUIPPED WITH SPECIFIC MBE4000 EPA07 MODEL ENGINES. THE INTAKE AIR GRID HEATER MAY SHORT CIRCUIT AND FAIL DUE TO EXCESSIVE INTERNAL TEMPERATURES.

Risk: A short circuited grid heater could result in a vehicle fire and injury to vehicle occupants.

Original NHTSA wording

A SHORT CIRCUITED GRID HEATER COULD RESULT IN A VEHICLE FIRE AND INJURY TO VEHICLE OCCUPANTS.

Remedy & notes

Dtna will notify owners of the recall during March 2011. Another notification will be issued once the remedy is released. Dtna expects the remedy to be available by December 1, 2011. Repairs will be performed by dtna dealers free of charge. Owners May contact dtna toll-free at 1-800-547-0712. This recall is asscociated with a previous recall, campaign number 10V-341.

Daimler trucks' recall campaign number is 10C-5.owners May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .

Fuel System

Oct 6, 2009 · NHTSA campaign 09V391000 · 10,185 vehicles

Problem: Daimler trucks is recalling certain model year 2006 through 2010 heavy trucks manufactured between January 17, 2006 and March 31, 2009, equipped with EPA07 model MBE4000 engines built with plastic low pressure fuel lines. The plastic lines May experience leaks due to fatigue cracks caused by stress and vibration combined with high internal pressure.

Original NHTSA wording

DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2006 THROUGH 2010 HEAVY TRUCKS MANUFACTURED BETWEEN JANUARY 17, 2006 AND MARCH 31, 2009, EQUIPPED WITH EPA07 MODEL MBE4000 ENGINES BUILT WITH PLASTIC LOW PRESSURE FUEL LINES. THE PLASTIC LINES MAY EXPERIENCE LEAKS DUE TO FATIGUE CRACKS CAUSED BY STRESS AND VIBRATION COMBINED WITH HIGH INTERNAL PRESSURE.

Risk: If a diesel fuel leak continues undetected under certain conditions fuel May ignite on a hot engine surface and/or fuel May spill on the road increasing the risk of a crash.

Original NHTSA wording

IF A DIESEL FUEL LEAK CONTINUES UNDETECTED UNDER CERTAIN CONDITIONS FUEL MAY IGNITE ON A HOT ENGINE SURFACE AND/OR FUEL MAY SPILL ON THE ROAD INCREASING THE RISK OF A CRASH.

Remedy & notes

Daimler trucks will notify owners and the remedy will be performed by detroit diesel corporation authorized repair facilities and direct warranty customers. The safety recall began on May 7, 2010. Owners May contact daimler trucks at 1-800-547-0712.

Daimler truck's recall campaign number is 09C-2.owners May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .

Engine

Sep 23, 2009 · NHTSA campaign 09V366000 · 25,362 vehicles

Problem: Daimler trucks is recalling model year 2004-2010 trucks equipped with caterpillar C15 engine. The variable valve actuation oil line May rub against the p-clips retaining the oil line, causing an oil leak.

Original NHTSA wording

DAIMLER TRUCKS IS RECALLING MODEL YEAR 2004-2010 TRUCKS EQUIPPED WITH CATERPILLAR C15 ENGINE. THE VARIABLE VALVE ACTUATION OIL LINE MAY RUB AGAINST THE P-CLIPS RETAINING THE OIL LINE, CAUSING AN OIL LEAK.

Risk: An oil leak May result in a fire.

Original NHTSA wording

AN OIL LEAK MAY RESULT IN A FIRE.

Remedy & notes

Daimler trucks is working with caterpillar to remedy these vehicles. Please see caterpillar's defect report 09E-020. Caterpillar will inspect and repair the necessary components free of charge. The recall began on May 5, 2009. Owners May contact caterpillar toll-free at 1-800-447-4986 or daimler trucks at 1-800-547-0712.

Daimler trucks recall no. Fl-558. Owners May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .

Fuel System

Mar 11, 2008 · NHTSA campaign 08V113000 · 62,000 vehicles

Problem: Daimler trucks is recalling 62,000 my 2005-2007 Freightliner business class, century class, columbia, coronado, fld, classic, sterling a-line, l-line, and western star 4900 trucks. A fractured fuel line could leak diesel fuel.

Original NHTSA wording

DAIMLER TRUCKS IS RECALLING 62,000 MY 2005-2007 FREIGHTLINER BUSINESS CLASS, CENTURY CLASS, COLUMBIA, CORONADO, FLD, CLASSIC, STERLING A-LINE, L-LINE, AND WESTERN STAR 4900 TRUCKS. A FRACTURED FUEL LINE COULD LEAK DIESEL FUEL.

Risk: If a leak continues undetected under certain conditions, fuel May ignite at a hot engine surface and/or fuel May be spilled on the road surface.

Original NHTSA wording

IF A LEAK CONTINUES UNDETECTED UNDER CERTAIN CONDITIONS, FUEL MAY IGNITE AT A HOT ENGINE SURFACE AND/OR FUEL MAY BE SPILLED ON THE ROAD SURFACE.

Remedy & notes

High pressure fuel lines and transfer tubes will be inspected and replaced free of charged. The recall began on July 9, 2008. Owners May contact daimler trucks at 1-800-547-0712.

Daimler truck recall no. Fl-526.customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Trailer Hitches

Nov 13, 2007 · NHTSA campaign 07V530000 · 38,000 vehicles

Problem: On certain truck-tractors equipped with holland simplex se or se II fifth wheels, the latch lever pivot bolt assembly May have been over-tightened which could distort the pivot bolt spacer sleeve. Corrosion or contaminates in the pivot May cause it to bind and prevent the fifth wheel jaw from latching securely around the trailer king pin.

Original NHTSA wording

ON CERTAIN TRUCK-TRACTORS EQUIPPED WITH HOLLAND SIMPLEX SE OR SE II FIFTH WHEELS, THE LATCH LEVER PIVOT BOLT ASSEMBLY MAY HAVE BEEN OVER-TIGHTENED WHICH COULD DISTORT THE PIVOT BOLT SPACER SLEEVE. CORROSION OR CONTAMINATES IN THE PIVOT MAY CAUSE IT TO BIND AND PREVENT THE FIFTH WHEEL JAW FROM LATCHING SECURELY AROUND THE TRAILER KING PIN.

Risk: There is a possibility that the fifth wheel May fail to latch without the driver's knowledge. When the occurs, the driver could drive away and the trailer could become disengaged increasing the risk of a crash.

Original NHTSA wording

THERE IS A POSSIBILITY THAT THE FIFTH WHEEL MAY FAIL TO LATCH WITHOUT THE DRIVER'S KNOWLEDGE. WHEN THE OCCURS, THE DRIVER COULD DRIVE AWAY AND THE TRAILER COULD BECOME DISENGAGED INCREASING THE RISK OF A CRASH.

Remedy & notes

Dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer. The recall began on January 3, 2008. Owners May contact Freightliner at 1-800-547-0712.

Freightliner recall no. Fl-514.customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Steering

Sep 6, 2007 · NHTSA campaign 07V403000 · 450 vehicles

Problem: On certain trucks equipped with rack and pinion steering, the ball socket assembly at the inner end of the driver side tie rod May be damaged in a sharp turn. Excessive tie rod angles May loosen the tie rod in the ball socket or damage the threaded tie rod socket attachment to the steering rack on the driver side. The threaded end of the ball socket assembly May fracture and separate.

Original NHTSA wording

ON CERTAIN TRUCKS EQUIPPED WITH RACK AND PINION STEERING, THE BALL SOCKET ASSEMBLY AT THE INNER END OF THE DRIVER SIDE TIE ROD MAY BE DAMAGED IN A SHARP TURN. EXCESSIVE TIE ROD ANGLES MAY LOOSEN THE TIE ROD IN THE BALL SOCKET OR DAMAGE THE THREADED TIE ROD SOCKET ATTACHMENT TO THE STEERING RACK ON THE DRIVER SIDE. THE THREADED END OF THE BALL SOCKET ASSEMBLY MAY FRACTURE AND SEPARATE.

Risk: A fractured tie rod assembly will make the vehicle more difficult to control at higher speeds and a crash May occur.

Original NHTSA wording

A FRACTURED TIE ROD ASSEMBLY WILL MAKE THE VEHICLE MORE DIFFICULT TO CONTROL AT HIGHER SPEEDS AND A CRASH MAY OCCUR.

Remedy & notes

Dealers will change the front axle steering stops to prevent interference in the tie rod ball socket assembly and steering components will be replaced free of charge. The recall began on July 8, 2008, and will be mailed in phases through December 31, 2008. Owners May contact Freightliner at 1-800-547-0712.

Freightliner recall no. Fl-513. Customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Steering

Sep 5, 2007 · NHTSA campaign 07V400000 · 413 vehicles

Problem: On certain trucks equipped with rack and pinion steering, the tie rod arms May have been incorrectly installed. The threaded end of the ball socket assembly May fracture and separate.

Original NHTSA wording

ON CERTAIN TRUCKS EQUIPPED WITH RACK AND PINION STEERING, THE TIE ROD ARMS MAY HAVE BEEN INCORRECTLY INSTALLED. THE THREADED END OF THE BALL SOCKET ASSEMBLY MAY FRACTURE AND SEPARATE.

Risk: A fractured tie rod assembly will make the vehicle more difficult to control at higher speeds and a crash May occur.

Original NHTSA wording

A FRACTURED TIE ROD ASSEMBLY WILL MAKE THE VEHICLE MORE DIFFICULT TO CONTROL AT HIGHER SPEEDS AND A CRASH MAY OCCUR.

Remedy & notes

Dealers will inspect for installation of the steering arms. Steering components will be replaced on trucks that have incorrectly installed tie rod arms. The recall began on May 1, 2008. Owner May contact Freightliner at 1-800-547-0712.

Freightliner recall no. Fl-512.customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Service Brakes

Jul 16, 2007 · NHTSA campaign 07V302000 · 75,000 vehicles

Problem: Certain Freightliner school bus chassis, heavy trucks, and thomas built school buses manufactured between July 2002 and July 3, 2007, equipped with bendix sr-7 spring brake control valves. The parker scv brass 90 degree single check valves (scv) which attach to the supply port of a bendix sr-7 spring brake modulating valve can break apart. Pieces of the parker scv can become lodged inside the sr-7 spring brake modulating valve, potentially causing either leakage out of the sr-7 valve or preventing air from properly exhausting from the sr-7 valve. Also, due to a manufacturing defect in the internal rubber check valve inside the sr-7 spring brake modulating valves, the valves can become deformed and not seat properly.

Original NHTSA wording

CERTAIN FREIGHTLINER SCHOOL BUS CHASSIS, HEAVY TRUCKS, AND THOMAS BUILT SCHOOL BUSES MANUFACTURED BETWEEN JULY 2002 AND JULY 3, 2007, EQUIPPED WITH BENDIX SR-7 SPRING BRAKE CONTROL VALVES. THE PARKER SCV BRASS 90 DEGREE SINGLE CHECK VALVES (SCV) WHICH ATTACH TO THE SUPPLY PORT OF A BENDIX SR-7 SPRING BRAKE MODULATING VALVE CAN BREAK APART. PIECES OF THE PARKER SCV CAN BECOME LODGED INSIDE THE SR-7 SPRING BRAKE MODULATING VALVE, POTENTIALLY CAUSING EITHER LEAKAGE OUT OF THE SR-7 VALVE OR PREVENTING AIR FROM PROPERLY EXHAUSTING FROM THE SR-7 VALVE. ALSO, DUE TO A MANUFACTURING DEFECT IN THE INTERNAL RUBBER CHECK VALVE INSIDE THE SR-7 SPRING BRAKE MODULATING VALVES, THE VALVES CAN BECOME DEFORMED AND NOT SEAT PROPERLY.

Risk: These conditions could either result in leakage and cause a delay in the application of the spring brake without warning or possibly lead to unintended vehicle rollaway or brake drag which could result in a vehicle crash, personal injury, or death.

Original NHTSA wording

THESE CONDITIONS COULD EITHER RESULT IN LEAKAGE AND CAUSE A DELAY IN THE APPLICATION OF THE SPRING BRAKE WITHOUT WARNING OR POSSIBLY LEAD TO UNINTENDED VEHICLE ROLLAWAY OR BRAKE DRAG WHICH COULD RESULT IN A VEHICLE CRASH, PERSONAL INJURY, OR DEATH.

Remedy & notes

Freightliner will notify owners and repair the vehicles free of charge. The recall began on January 11, 2008 to Freightliner, sterling, and Freightliner custom chassis owners; to thomas built bus owners on February 1, 2008. Owners can contact Freightliner at 1-800-547-0712.

Freightliner recall no. Fl-504.customers May contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

Steering

Jul 3, 2007 · NHTSA campaign 07V289000 · 25,643 vehicles

Problem: Certain Freightliner school buses and trucks manufactured from October 23, 2004, to March 21, 2006. During the steering column manufacturing process two welds May have been missing.

Original NHTSA wording

CERTAIN FREIGHTLINER SCHOOL BUSES AND TRUCKS MANUFACTURED FROM OCTOBER 23, 2004, TO MARCH 21, 2006. DURING THE STEERING COLUMN MANUFACTURING PROCESS TWO WELDS MAY HAVE BEEN MISSING.

Risk: Columns with two welds missing May fatigue and fracture and allow the steering wheel to progressively be moved out of its normal position which May cause the steering to respond differently than expected. If this condition is ignored, a crash May occur.

Original NHTSA wording

COLUMNS WITH TWO WELDS MISSING MAY FATIGUE AND FRACTURE AND ALLOW THE STEERING WHEEL TO PROGRESSIVELY BE MOVED OUT OF ITS NORMAL POSITION WHICH MAY CAUSE THE STEERING TO RESPOND DIFFERENTLY THAN EXPECTED. IF THIS CONDITION IS IGNORED, A CRASH MAY OCCUR.

Remedy & notes

Freightliner will notify owners and inspect and repair the affected vehicle free of charge. The recall began on August 30, 2007. Owners can contact Freightliner at 1-800-547-0712.

Freightliner recall no. Fl-503.customers May contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

Suspension

Apr 12, 2007 · NHTSA campaign 07V169000 · 219 vehicles

Problem: On certain trucks built with front axles assembled by arvinmeritor, the front spindle nut May be over-tightened causing preload on the front wheel bearings which could lead to premature bearing wear.

Original NHTSA wording

ON CERTAIN TRUCKS BUILT WITH FRONT AXLES ASSEMBLED BY ARVINMERITOR, THE FRONT SPINDLE NUT MAY BE OVER-TIGHTENED CAUSING PRELOAD ON THE FRONT WHEEL BEARINGS WHICH COULD LEAD TO PREMATURE BEARING WEAR.

Risk: If rapid bearing wear is allowed to progress, the front wheel assembly May separate from the vehicle which could result in a crash.

Original NHTSA wording

IF RAPID BEARING WEAR IS ALLOWED TO PROGRESS, THE FRONT WHEEL ASSEMBLY MAY SEPARATE FROM THE VEHICLE WHICH COULD RESULT IN A CRASH.

Remedy & notes

Dealers will inspect the front hub installation for correct bearing adjustment. If the bearing adjustment is incorrect, the front wheel bearings will be replaced. The recall began on June 28, 2007. Owners May contact Freightliner at 1-800-385-4357.

Freightliner recall no. Fl-494.customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Suspension

Nov 2, 2006 · NHTSA campaign 06V424000 · 1 vehicles

Problem: On certain trucks equipped with arvinmeritor front axle assemblies, the front spindle nut May be over-tightened causing preload on the front wheel bearings which May lead to premature bearing wear.

Original NHTSA wording

ON CERTAIN TRUCKS EQUIPPED WITH ARVINMERITOR FRONT AXLE ASSEMBLIES, THE FRONT SPINDLE NUT MAY BE OVER-TIGHTENED CAUSING PRELOAD ON THE FRONT WHEEL BEARINGS WHICH MAY LEAD TO PREMATURE BEARING WEAR.

Risk: If rapid bearing wear is allowed to progress, the front wheel assembly May separate from the vehicle and cause a crash without prior warning.

Original NHTSA wording

IF RAPID BEARING WEAR IS ALLOWED TO PROGRESS, THE FRONT WHEEL ASSEMBLY MAY SEPARATE FROM THE VEHICLE AND CAUSE A CRASH WITHOUT PRIOR WARNING.

Remedy & notes

Dealers will inspect the front hub installation for correct bearing adjustment. If the bearing adjustment is incorrect, the front wheel bearings will be replaced free of charge. The recall began on January 22, 2007. Owners May contact Freightliner at 1-800-547-0712.

Freightliner recall no. Fl-484. Customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Electrical System

Jun 5, 2006 · NHTSA campaign 06V190000 · 61,000 vehicles

Problem: On certain trucks, the protective cover for the cab power distribution model (pdm) May be missing or improperly installed.

Original NHTSA wording

ON CERTAIN TRUCKS, THE PROTECTIVE COVER FOR THE CAB POWER DISTRIBUTION MODEL (PDM) MAY BE MISSING OR IMPROPERLY INSTALLED.

Risk: If the protective cover is missing or not positioned correctly, any water intrusion from an open window or windshield leak May seep through the upper dash cover seam and drip onto the pdm. Water on the pdm circuits May cause a short circuit resulting in a fire that could cause personal injury.

Original NHTSA wording

IF THE PROTECTIVE COVER IS MISSING OR NOT POSITIONED CORRECTLY, ANY WATER INTRUSION FROM AN OPEN WINDOW OR WINDSHIELD LEAK MAY SEEP THROUGH THE UPPER DASH COVER SEAM AND DRIP ONTO THE PDM. WATER ON THE PDM CIRCUITS MAY CAUSE A SHORT CIRCUIT RESULTING IN A FIRE THAT COULD CAUSE PERSONAL INJURY.

Remedy & notes

Dealers will install a new cover free of charge. The recall began on December 18, 2006. Owners May contact Freightliner at 1-800-547-0712.

Freightliner recall no. Fl-476.customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Engine

Feb 8, 2006 · NHTSA campaign 06V030000 · 5,771 vehicles

Problem: On certain trucks equipped with caterpillar diesel engines, the variable valve actuation oil line May wear against the sharp edge of the cylinder head if not positioned correctly.

Original NHTSA wording

ON CERTAIN TRUCKS EQUIPPED WITH CATERPILLAR DIESEL ENGINES, THE VARIABLE VALVE ACTUATION OIL LINE MAY WEAR AGAINST THE SHARP EDGE OF THE CYLINDER HEAD IF NOT POSITIONED CORRECTLY.

Risk: The oil line May be cut on the cylinder head causing an oil leak and a possible fire.

Original NHTSA wording

THE OIL LINE MAY BE CUT ON THE CYLINDER HEAD CAUSING AN OIL LEAK AND A POSSIBLE FIRE.

Remedy & notes

Caterpillar, in conjunction with Freightliner, will be conducting the owner notification and remedy for this campaign free of charge. Owners May call caterpillar at 309-675-6496, or Freightliner at 1-800-547-0712.

Freightliner recall no. Fl-471.customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Power Train

Dec 6, 2005 · NHTSA campaign 05V551000 · 500 vehicles

Problem: On certain trucks and motor home chassis, the top flange of the front axle i-beam May fatigue and fracture.

Original NHTSA wording

ON CERTAIN TRUCKS AND MOTOR HOME CHASSIS, THE TOP FLANGE OF THE FRONT AXLE I-BEAM MAY FATIGUE AND FRACTURE.

Risk: Driver May experience loss control of the vehicle and a crash could occur without prior warning.

Original NHTSA wording

DRIVER MAY EXPERIENCE LOSS CONTROL OF THE VEHICLE AND A CRASH COULD OCCUR WITHOUT PRIOR WARNING.

Remedy & notes

Dealers will inspect and replace the front axle assembly. The recall began on March 15, 2006, for phase i. Phase 2 will begin during August 2006. This recall is being conducted in two phases. Phase i will replace the complete axle assembly; and phase II will replace the axle beam and steering knuckles. Owners May contact Freightliner at 1-800-547-0712.

Freightliner recall no. Fl-467.customers May also contact the national highway traffic safety administration?s vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Recall text as published by NHTSA and the manufacturer.

What owners complain about

Owner complaints filed with NHTSA; one complaint can name several areas. Not verified by NHTSA.

Complaints by year filed

2005: 1 complaints20052006: 3 complaints200632007: 1 complaints20072008: 2 complaints20082009: 1 complaints20092010: 2 complaints20102012: 1 complaints20122013: 2 complaints20132014: 1 complaints20141

NHTSA investigations

Daimler Trucks North America Recalls

AQ18002 · opened Apr 23, 2018 · closed Jul 11, 2024
Summary

On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. NHTSA and DTNA entered into a Consent Order on December 29, 2020, to resolve NHTSA’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to NHTSA, and DTNA failed to submit field reports to NHTSA as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of t…

RACK AND PINION FAILURE

PE09040 · opened Aug 31, 2009 · closed Nov 19, 2009 · led to recall 09V357000
Summary

A CONSUMER COMPLAINT WAS FILED WITH THE AGENCY ON AUGUST 22, 2009, BY AN INDEPENDENT CONTRACTOR LEASING A 2009 FREIGHTLINER CASCADIA.THE COMPLAINT ALLEGES THAT IN APRIL OF 2009 AT APPROXIMATELY 50,000 MILES HE EXPERIENCED A SEAL RUPTURE IN THE RACK AND PINION ASSEMBLY.A NEW SEAL WAS INSTALLED AND AT 56,000 MILES HE FOUND HIS RIGHT STEER TIRE COMPLETELY BALD.THE REPAIR SHOP IDENTIFIED AN INTERNAL FAILURE OF THE RACK AND PINION ASSEMBLY CAUSING THE RAPID WEAR OF THE TIRE.ODI HAS IDENTIFIED EWR FIELD REPORTS RELATED TO FAILED RACK AND PINIONS ON THE SUBJECT VEHICLES.THE REPORTS IDENTIFY EITHER AN INTERNAL FAILURE OF THE RACK AND PINION ASSEMBLY THAT RESULTED IN CRASHES OR A LOOSENESS OF THE INNER TIE ROD END OF THE RACK AND PINION RESULTING IN A POOR ALIGNMENT AND PREMATURE TIRE WEAR.INFORMATION RECEIVED DURING THIS INVESTIGATION FROM FREIGHTLINER DETAILED FAILURES OF THE RACK AND PINION ASSEMBLIES ON THE SUBJECT VEHICLES.THESE FAILURES WERE THE RESULT OF THE LEFT HAND INNER TIE ROD END BECOMING LOOSE OVER TIME.WHEN THE TIE ROD BECOMES LOOSE, IT MAY SEPARATE FROM THE RACK AND PINION ASSEMBLY AND MAKE THE VEHICLE DIFFICULT TO STEER.FRIEGHTLINER HAS CONCLUDED THAT A DEFECT RELATED TO MOTOR VEHICLE SAFETY DOES EXIST ON THE SUBJECT VEHICLES AND HAS INITIATED A SAFETY RECALL (09V-357) THAT WILL REMEDY ALL OF THEM.THIS RECALL INVOLVES REMOVING THE TIE ROD AND ADDING A COMPOUND TO IT THAT WILL PREVENT THE TIE ROD FROM COMING LOOSE OVER TIME.A COPY OF THE RECALL IS ATTACHED.FREIGHTLINER…

INSECURE FIFTH WHEEL LATCHING

PE07047 · opened Sep 14, 2007 · closed Nov 19, 2007 · led to recall 07V530000
Summary

ON NOVEMBER 19, 2007, FREIGHTLINER FILED DEFECT REPORT 07V-530 WHICH OUTLINES A SAFETY RECALL PROGRAM TO NOTIFY THE AFFECTED OWNERS AND CORRECT THE AFFECTED VEHICLES.

STEERING COLUMN WELD CRACKS

EA07002 · opened Jan 30, 2007 · closed Jul 12, 2007 · led to recall 07V289000
Summary

AS A RESULT OF THE ODI INVESTIGATION, FREIGHTLINER HAS AGREED TO RECALL (NUMBER 07V-289) ALL OF THE VEHICLES MANUFACTURED WITH STEERING COLUMNS POTENTIALLY MISSING WELDS.THE RECALL REMEDY WILL INVOLVE INSPECTING THE RECALLED VEHICLES FOR MISSING WELDS AND IF FOUND REPLACE THE STEERING COLUMN.EARLY WARNING AGGREGATE DATA SUBMITTED TO NHTSA BY FREIGHTLINER SUGGESTED THAT A STEERING PROBLEM (EWR CODE 01) EXISTED FOR THE 2004 AND 2005 CENTURY AND COLUMBIA CLASS VEHICLES.THE COUNT OF FIELD REPORTS SUBMITTED FOR THE FIRST QUARTER OF 2006 WAS HIGHER THAN THE AVERAGE OF THE PREVIOUS 6 QUARTERS FOR THE AGGREGATE STEERING DATA.ODI'S FURTHER REVIEW OF THE EWR DATA FOUNDFIELD REPORTS THAT DESCRIBED STEERING COLUMN FAILURES AS A RESULT OF STEERING COLUMN WELDS CRACKING OR BREAKING.INFORMATION RECEIVED FROM FREIGHTLINER DETAILED FAILURES OF THE STEERING COLUMNS ON THE SUBJECT VEHICLES.THESE FAILURES WERE THE RESULT OF MISSING AND CRACKED WELDS ON THE STEERING COLUMN ASSEMBLY.DURING TESTING OF VEHICLES CONTAINING DEFECTIVE STEERING COLUMNS, ODI DETERMINED THAT WELD FAILURES IN THE STEERING COLUMN CREATE A SITUATION WHERE THE VEHICLE BECOMES DIFFICULT TO STEER OR MAY STARTLE THE DRIVER UPON FAILING, THUS PRESENTING A SAFETY RISK.A COPY OF THE RECALL IS ATTACHED.FREIGHTLINER'S ACTION RESOLVES THE ISSUES RAISED BY THIS INVESTIGATION AND, THEREFORE, THIS INVESTIGATION IS CLOSED.

2006 vs. other Freightliner Columbia years

Owner complaints by model year; the darker bar is the 2006. Click a bar to switch year.

Questions

Does the 2006 Freightliner Columbia have recalls?

Yes — NHTSA lists 21 recall campaigns covering the 2006 Freightliner Columbia, the latest from Apr 14, 2020 (exterior lighting). A recall applies to specific vehicles: enter your VIN at nhtsa.gov/recalls to see whether yours is affected and still open.

What are the most common problems with the 2006 Freightliner Columbia?

Owner complaints filed with NHTSA most often mention engine (6), service brakes (2), electrical system (1). Complaints are consumer reports and are not verified by NHTSA.