2007 Volvo Vn recalls and problems

The 2007 Volvo Vn has 3 recalls and 3 owner complaints on file with NHTSA; the most reported problem area is engine.

How the 2007 compares

High

Fewest complaintsMost complaints

High complaint count among 15 Vn model years — 4th most.

3recalls

3complaints

0crashes

0fires

0injuries

253,000median miles

Owner complaints filed with NHTSA, not verified and not adjusted for sales. Ranking compares this model's own years only.

Does your car have an open recall?
Recalls apply to specific vehicles. Only a VIN lookup on NHTSA's official site shows whether yours is affected and still unrepaired.

Check your VIN →

3 recalls

Seat Belts

Oct 18, 2012 · NHTSA campaign 12V510000 · 1,496 vehicles

Problem: Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages."

Risk: In the event of a crash, an insufficient seat belt weld may prevent the seat belt from properly restraining the occupant. This increases the risk of injury to the seat occupant.

Remedy & notes

Volvo Trucks of America will notify owners, and dealers will replace the suspected d-ring, free of change. The safety recall began on May 10, 2013. Owners may contact Volvo at 1-336-393-2000.

Volvo's recall campaign number is RVXX1204.Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153), or go to www.safercar.gov.

Service Brakes

Nov 12, 2010 · NHTSA campaign 10V571000 · 6,187 vehicles

Problem: Volvo trucks is recalling certain model year 2007 and 2009 vhd, model year 2006 through 2010 vn, and model year 2007 through 2009 vt trucks manufactured from November 7, 2005, through October 30, 2009, equipped with an air release fifth wheel. The inversion valve on the frame May be orientated where contaminants can enter the valve through the exhaust port. As a result, the brake valve May corrode.

Original NHTSA wording

VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2007 AND 2009 VHD, MODEL YEAR 2006 THROUGH 2010 VN, AND MODEL YEAR 2007 THROUGH 2009 VT TRUCKS MANUFACTURED FROM NOVEMBER 7, 2005, THROUGH OCTOBER 30, 2009, EQUIPPED WITH AN AIR RELEASE FIFTH WHEEL. THE INVERSION VALVE ON THE FRAME MAY BE ORIENTATED WHERE CONTAMINANTS CAN ENTER THE VALVE THROUGH THE EXHAUST PORT. AS A RESULT, THE BRAKE VALVE MAY CORRODE.

Risk: Corrosion of the valve can cause it to malfunction, thereby adversely affecting braking performance and increasing the risk of a crash.

Original NHTSA wording

CORROSION OF THE VALVE CAN CAUSE IT TO MALFUNCTION, THEREBY ADVERSELY AFFECTING BRAKING PERFORMANCE AND INCREASING THE RISK OF A CRASH.

Remedy & notes

Dealers will inspect the inversion valve and replace as required. This service will be performed free of charge. The safety recall is expected to begin on or before February 18, 2011. Owners May contact Volvo trucks at 1-800-528-6586.

Volvo trucks safety recall no. Rvxx1006.owners May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .

Steering

Apr 4, 2006 · NHTSA campaign 06V099000 · 2,137 vehicles

Problem: On certain heavy duty class 8 trucks equipped with dana steering shafts, there is a potential that the steering shaft pinch bolt hole May be incorrectly located. The pinch bolt fits into a groove in the steering gear input shaft to ensure that the steering shaft does not separate from the steering gear if the pinch bolt comes loose.

Original NHTSA wording

ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH DANA STEERING SHAFTS, THERE IS A POTENTIAL THAT THE STEERING SHAFT PINCH BOLT HOLE MAY BE INCORRECTLY LOCATED. THE PINCH BOLT FITS INTO A GROOVE IN THE STEERING GEAR INPUT SHAFT TO ENSURE THAT THE STEERING SHAFT DOES NOT SEPARATE FROM THE STEERING GEAR IF THE PINCH BOLT COMES LOOSE.

Risk: This could potentially lead to steering shaft separation resulting in loss of control of the vehicle if the pinch bolt were to come loose increasing the risk of a crash.

Original NHTSA wording

THIS COULD POTENTIALLY LEAD TO STEERING SHAFT SEPARATION RESULTING IN LOSS OF CONTROL OF THE VEHICLE IF THE PINCH BOLT WERE TO COME LOOSE INCREASING THE RISK OF A CRASH.

Remedy & notes

Dealers will inspect the steering shaft and replace it as required free of charge. The recall began on August 28, 006. Owners May contact Volvo trucks at 1-800-528-6586.

Volvo trucks recall no. Rvxx0602.customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Recall text as published by NHTSA and the manufacturer.

What owners complain about

Engine2

Power Train2

Unknown or other1

Wheels1

Owner complaints filed with NHTSA; one complaint can name several areas. Not verified by NHTSA.

Complaints by year filed

NHTSA investigations

Volvo Sleeper glass de-bonding

RQ11001 · opened May 23, 2011 · closed Jan 20, 2012

Summary

ODI opened Recall Query RQ11-001 after a review of EWR Field Reports identified lower bunk window separations on the subject vehicles.Volvo had issued three recalls for sleeper window separations since 2003.Additionally, Volvo had issued two bulletins for sleeper window issues during the same time period.The frequency of related actions led ODI to open this formal investigation.An Information Request (IR) letter was sent to Volvo on 23 June 2011.Volvo responded on 17 August 2011 and then provided updated warranty information on 9 January 2012.Volvo provided production change data and warranty information which was correlated to vehicle build month and failure date.ODI analyzed the data to determine if additional production time frames should have been included in previous recalls.ODI also requested information from its network of fleet owners.The response from this network reaffirmed the accuracy of the updated warranty information.Based on the information and data received, ODI has concluded that all production periods have been appropriately addressed by Volvo's previous recalls and no additional recall action is required at this time.

SAF HOLLAND FIFTH WHEEL ASSEMBLY

PE07046 · opened Sep 14, 2007 · closed Nov 9, 2007

Summary

ON OCTOBER 18, 2007 VOLVO TRUCKS NORTH AMERICA FILED DEFECT REPORT 07V-496 WHICH OUTLINES A SAFETY RECALL PROGRAM TO NOTIFY THE AFFECTED OWNERS AND CORRECT THE AFFECTED VEHICLES.

2007 vs. other Volvo Vn years

Owner complaints by model year; the darker bar is the 2007. Click a bar to switch year.

Questions

Does the 2007 Volvo Vn have recalls?

Yes — NHTSA lists 3 recall campaigns covering the 2007 Volvo Vn, the latest from Oct 18, 2012 (seat belts). A recall applies to specific vehicles: enter your VIN at nhtsa.gov/recalls to see whether yours is affected and still open.

What are the most common problems with the 2007 Volvo Vn?

Owner complaints filed with NHTSA most often mention engine (2), power train (2), unknown or other (1). Complaints are consumer reports and are not verified by NHTSA.