2001 Peterbilt 330 recalls and problems

The 2001 Peterbilt 330 has 4 recalls and 0 owner complaints on file with NHTSA.

How the 2001 compares

Too few model years with complaints to compare.

4recalls

0complaints

0crashes

0fires

0injuries

—median miles

Owner complaints filed with NHTSA, not verified and not adjusted for sales. Ranking compares this model's own years only.

Does your car have an open recall?
Recalls apply to specific vehicles. Only a VIN lookup on NHTSA's official site shows whether yours is affected and still unrepaired.

Check your VIN →

4 recalls

Service Brakes

Jan 15, 2002 · NHTSA campaign 02V018001 · 2,302 vehicles

Problem: On certain heavy duty trucks equipped with meritor wabco pneumatic anitlock brake system (ABS) valve packages, the assembly bolts on these valve packages were not tightened correctly.

Original NHTSA wording

ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH MERITOR WABCO PNEUMATIC ANITLOCK BRAKE SYSTEM (ABS) VALVE PACKAGES, THE ASSEMBLY BOLTS ON THESE VALVE PACKAGES WERE NOT TIGHTENED CORRECTLY.

Risk: Bolts torqued below specification will not reliably prevent air leakage at the affected ABS valve package interface joints once the component begins normal vehicle operation. If air leaks develop at any of the ABS valve package interface joints, brake system pressure reductions could occur during braking or normal operation with units equipped with the traction control option, potentially extending stopping distances, possibly resulting in a vehicle crash.

Original NHTSA wording

BOLTS TORQUED BELOW SPECIFICATION WILL NOT RELIABLY PREVENT AIR LEAKAGE AT THE AFFECTED ABS VALVE PACKAGE INTERFACE JOINTS ONCE THE COMPONENT BEGINS NORMAL VEHICLE OPERATION. IF AIR LEAKS DEVELOP AT ANY OF THE ABS VALVE PACKAGE INTERFACE JOINTS, BRAKE SYSTEM PRESSURE REDUCTIONS COULD OCCUR DURING BRAKING OR NORMAL OPERATION WITH UNITS EQUIPPED WITH THE TRACTION CONTROL OPTION, POTENTIALLY EXTENDING STOPPING DISTANCES, POSSIBLY RESULTING IN A VEHICLE CRASH.

Remedy & notes

Dealers will tighten the fasteners to the proper specification. Owner notification began February 15, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact Kenworth at 1-425-828-5440 or Peterbilt at 1-940-591-4201.

Also contact the national highway traffic safety administration's auto safety hotline at 1-888-DASH-2-DOT (1-888-327-4236).

Latches/locks/linkages

Jun 5, 2001 · NHTSA campaign 01V179000 · 52,500 vehicles

Problem: Vehicle description: Heavy duty trucks. A change in the internal linkage of certain cab doors has created a possible binding condition.

Original NHTSA wording

VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS. A CHANGE IN THE INTERNAL LINKAGE OF CERTAIN CAB DOORS HAS CREATED A POSSIBLE BINDING CONDITION.

Risk: If the linkage binds, full engagement of the door latch May not occur, allowing the door to open inadvertently.

Original NHTSA wording

IF THE LINKAGE BINDS, FULL ENGAGEMENT OF THE DOOR LATCH MAY NOT OCCUR, ALLOWING THE DOOR TO OPEN INADVERTENTLY.

Remedy & notes

Dealers will modify the door linkage to correct the potential of binding. Owner notification began June 22, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact Peterbilt at 1-940-591-4000.

Also contact the national highway traffic safety administration's auto safety hotline at 1-888-DASH-2-DOT (1-888-327-4236).

Electrical System

May 21, 2001 · NHTSA campaign 01V165000 · 73 vehicles

Problem: Vehicle description: Heavy duty trucks equipped with cummins isc engines. Diodes (electronic devices that restrict current flow) contained in the pre-heat circuit of certain engine wiring harnesses were not properly insulated during the harness manufacturing process.

Original NHTSA wording

VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH CUMMINS ISC ENGINES. DIODES (ELECTRONIC DEVICES THAT RESTRICT CURRENT FLOW) CONTAINED IN THE PRE-HEAT CIRCUIT OF CERTAIN ENGINE WIRING HARNESSES WERE NOT PROPERLY INSULATED DURING THE HARNESS MANUFACTURING PROCESS.

Risk: This lack of insulation could allow the diodes to contact each other. Any contact between the diodes could lead to a short circuit and possibly a vehicle fire.

Original NHTSA wording

THIS LACK OF INSULATION COULD ALLOW THE DIODES TO CONTACT EACH OTHER. ANY CONTACT BETWEEN THE DIODES COULD LEAD TO A SHORT CIRCUIT AND POSSIBLY A VEHICLE FIRE.

Remedy & notes

Dealers will inspect the harnesses and remedy, if required, by properly insulating the diodes. Owner notification began June 22, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact Peterbilt at 1-940-591-4000.

Also contact the national highway traffic safety administration's auto safety hotline at 1-888-DASH-2-DOT (1-888-327-4236).

Seat Belts

Feb 22, 2001 · NHTSA campaign 01V054000 · 6,623 vehicles

Problem: Vehicle description: Class 7 and class 8 vehicles. These vehicles do not comply with the requirements of FMVSS no. 207, "seating system," and no. 210, "seat belt assembly anchorages." some fasteners used to attach the shoulder belt anchor bracket to the cab structure were omitted during production.

Original NHTSA wording

VEHICLE DESCRIPTION: CLASS 7 AND CLASS 8 VEHICLES. THESE VEHICLES DO NOT COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 207, "SEATING SYSTEM," AND NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES." SOME FASTENERS USED TO ATTACH THE SHOULDER BELT ANCHOR BRACKET TO THE CAB STRUCTURE WERE OMITTED DURING PRODUCTION.

Risk: In the event of a crash, the shoulder belt anchorage May not properly restrain the seat occupant, increasing the risk of personal injury.

Original NHTSA wording

IN THE EVENT OF A CRASH, THE SHOULDER BELT ANCHORAGE MAY NOT PROPERLY RESTRAIN THE SEAT OCCUPANT, INCREASING THE RISK OF PERSONAL INJURY.

Remedy & notes

Dealers will add the necessary fasteners. Owner notification began March 19, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact Peterbilt at 1-940-591-4000.

Also contact the national highway traffic safety administration's auto safety hotline at 1-888-DASH-2-DOT (1-888-327-4236).

Recall text as published by NHTSA and the manufacturer.

2001 vs. other Peterbilt 330 years

Owner complaints by model year; the darker bar is the 2001. Click a bar to switch year.

Questions

Does the 2001 Peterbilt 330 have recalls?

Yes — NHTSA lists 4 recall campaigns covering the 2001 Peterbilt 330, the latest from Jan 15, 2002 (service brakes). A recall applies to specific vehicles: enter your VIN at nhtsa.gov/recalls to see whether yours is affected and still open.

What are the most common problems with the 2001 Peterbilt 330?

Few complaints have been filed with NHTSA for the 2001 Peterbilt 330.