2007 Mercedes-Benz E recalls and problems

The 2007 Mercedes-Benz E has 2 recalls and 2 owner complaints on file with NHTSA; the most reported problem area is fuel system.

2007 Mercedes-Benz E
Photo: 2007 Mercedes-Benz E by OSX, Public domain, via Wikimedia Commons
How the 2007 compares
Fewest complaintsMost complaints

Average complaint count among 8 E model years — 5th most.

2recalls
2complaints
0crashes
0fires
0injuries
50,384median miles

Owner complaints filed with NHTSA, not verified and not adjusted for sales. Ranking compares this model's own years only.

Does your car have an open recall?
Recalls apply to specific vehicles. Only a VIN lookup on NHTSA's official site shows whether yours is affected and still unrepaired.
Check your VIN →

2 recalls

Electrical System

Jul 7, 2008 · NHTSA campaign 08V303000 · 404 vehicles

Problem: Mercedes-Benz is recalling my 2006-2008 m-class, r-class, my 2005-2009 slk-class, my 2005-2008 c-class, my 2003-2004 and 2006-2008 clk-class, my 2003-2008 e-class, my 2004 and 2008 cl-class, my 2008 cls-class, my 2004 and 2007-2008 s-class, my 2003 g-class, and my 2003-2004, 2006 and 2009 sl-class vehicles. A software calibration number (scn) coding received on the affected vehicles during a recent workshop visit was incorrect. Depending on the model year and model affected, the results of an incorrect scn coding can affect a number of vehicle safety and emission functions including the following types of functions: (1) the fuel gauge readings May be incorrect; (2) a stuck fuel-level sensor May not be displayed in the instrument cluster; (3) the obd system May cause the check engine light to illuminate incorrectly; and, (4) the speedometer May be out of tolerance.

Original NHTSA wording

MERCEDES-BENZ IS RECALLING MY 2006-2008 M-CLASS, R-CLASS, MY 2005-2009 SLK-CLASS, MY 2005-2008 C-CLASS, MY 2003-2004 AND 2006-2008 CLK-CLASS, MY 2003-2008 E-CLASS, MY 2004 AND 2008 CL-CLASS, MY 2008 CLS-CLASS, MY 2004 AND 2007-2008 S-CLASS, MY 2003 G-CLASS, AND MY 2003-2004, 2006 AND 2009 SL-CLASS VEHICLES. A SOFTWARE CALIBRATION NUMBER (SCN) CODING RECEIVED ON THE AFFECTED VEHICLES DURING A RECENT WORKSHOP VISIT WAS INCORRECT. DEPENDING ON THE MODEL YEAR AND MODEL AFFECTED, THE RESULTS OF AN INCORRECT SCN CODING CAN AFFECT A NUMBER OF VEHICLE SAFETY AND EMISSION FUNCTIONS INCLUDING THE FOLLOWING TYPES OF FUNCTIONS: (1) THE FUEL GAUGE READINGS MAY BE INCORRECT; (2) A STUCK FUEL-LEVEL SENSOR MAY NOT BE DISPLAYED IN THE INSTRUMENT CLUSTER; (3) THE OBD SYSTEM MAY CAUSE THE CHECK ENGINE LIGHT TO ILLUMINATE INCORRECTLY; AND, (4) THE SPEEDOMETER MAY BE OUT OF TOLERANCE.

Risk: In the event of a vehicle crash, the electrical fuel pump May not receive a crash signal that is required for the fuel pump to disconnect and prevent future fuel delivery as designed.

Original NHTSA wording

IN THE EVENT OF A VEHICLE CRASH, THE ELECTRICAL FUEL PUMP MAY NOT RECEIVE A CRASH SIGNAL THAT IS REQUIRED FOR THE FUEL PUMP TO DISCONNECT AND PREVENT FUTURE FUEL DELIVERY AS DESIGNED.

Remedy & notes

Dealers will recode the scn free of charge. The recall began on August 30, 2008. Owners May contact Mercedes-Benz at 1-800-367-6372.

Mercedes-Benz recall no. 2008 070001.customers May contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

Engine

Jan 9, 2008 · NHTSA campaign 08V006000 · 9,004 vehicles

Problem: On certain passenger vehicles equipped with diesel engines, the crankshaft sensor could fail due to separation of bond wires from the lead frame in the sensor. This results in an interruption in the electrical connection in the chip housing of the sensor.

Original NHTSA wording

ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH DIESEL ENGINES, THE CRANKSHAFT SENSOR COULD FAIL DUE TO SEPARATION OF BOND WIRES FROM THE LEAD FRAME IN THE SENSOR. THIS RESULTS IN AN INTERRUPTION IN THE ELECTRICAL CONNECTION IN THE CHIP HOUSING OF THE SENSOR.

Risk: When this happens, the vehicle May lose power rather than enter a limp-home mode. In addition, the vehicle cannot be restarted after failure of the electrical connection in the sensor, increasing the risk of a crash.

Original NHTSA wording

WHEN THIS HAPPENS, THE VEHICLE MAY LOSE POWER RATHER THAN ENTER A LIMP-HOME MODE. IN ADDITION, THE VEHICLE CANNOT BE RESTARTED AFTER FAILURE OF THE ELECTRICAL CONNECTION IN THE SENSOR, INCREASING THE RISK OF A CRASH.

Remedy & notes

Dealers will replace the crankshaft sensor. The recall began on February 4, 2008. Owners May contact Mercedes-Benz at 1-800-367-6372.

Mercedes recall no. 2008010005.customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Recall text as published by NHTSA and the manufacturer.

What owners complain about

Owner complaints filed with NHTSA; one complaint can name several areas. Not verified by NHTSA.

2007 vs. other Mercedes-Benz E years

Owner complaints by model year; the darker bar is the 2007. Click a bar to switch year.

Questions

Does the 2007 Mercedes-Benz E have recalls?

Yes — NHTSA lists 2 recall campaigns covering the 2007 Mercedes-Benz E, the latest from Jul 7, 2008 (electrical system). A recall applies to specific vehicles: enter your VIN at nhtsa.gov/recalls to see whether yours is affected and still open.

What are the most common problems with the 2007 Mercedes-Benz E?

Owner complaints filed with NHTSA most often mention fuel system (2). Complaints are consumer reports and are not verified by NHTSA.