2002 Kenworth T300 recalls and problems

The 2002 Kenworth T300 has 4 recalls and 0 owner complaints on file with NHTSA.

How the 2002 compares

Too few model years with complaints to compare.

4recalls

0complaints

0crashes

0fires

0injuries

—median miles

Owner complaints filed with NHTSA, not verified and not adjusted for sales. Ranking compares this model's own years only.

Does your car have an open recall?
Recalls apply to specific vehicles. Only a VIN lookup on NHTSA's official site shows whether yours is affected and still unrepaired.

Check your VIN →

4 recalls

Trailer Hitches

May 5, 2003 · NHTSA campaign 03V168000 · 483 vehicles

Problem: On certain trucks equipped with jost International jsk 37U series fifth wheels, a fatigue crack can develop in the bracket pin weld under certain loading conditions.

Original NHTSA wording

ON CERTAIN TRUCKS EQUIPPED WITH JOST INTERNATIONAL JSK 37U SERIES FIFTH WHEELS, A FATIGUE CRACK CAN DEVELOP IN THE BRACKET PIN WELD UNDER CERTAIN LOADING CONDITIONS.

Risk: If left undetected or corrected it could lead to the separation of the fifth wheel top plate from its mounting structure, possibly resulting in a crash.

Original NHTSA wording

IF LEFT UNDETECTED OR CORRECTED IT COULD LEAD TO THE SEPARATION OF THE FIFTH WHEEL TOP PLATE FROM ITS MOUNTING STRUCTURE, POSSIBLY RESULTING IN A CRASH.

Remedy & notes

Dealers will replace the bracket pins and repair instructions free of charge. Peterbilt's owner notification began June 20, 2003. Kenworth's owner notification began June 12, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact Peterbilt at 940-591-4201 or Kenworth 425-828-5440.

Peterbilt recall no. 403-C/Kenworth recall no. 03KW4.also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-DASH-2-DOT (1-888-327-4236).

Exterior Lighting

Feb 13, 2003 · NHTSA campaign 03V045000 · 9,890 vehicles

Problem: Certain trucks equipped with trailer connections fail to comply with the requirements of federal motor vehicle safety standards (FMVSS) no. 121, "air brake systems," and no. 108, "lamps, reflective devices, and associated equipment." the supplier removed a rubber grommet from the trailer light line connector. The vehicles are experiencing corrosion at the 7-WAY trailer connection. This causes intermittent flashing/flickering of the trailer lights.

Original NHTSA wording

CERTAIN TRUCKS EQUIPPED WITH TRAILER CONNECTIONS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARDS (FMVSS) NO. 121, "AIR BRAKE SYSTEMS," AND NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THE SUPPLIER REMOVED A RUBBER GROMMET FROM THE TRAILER LIGHT LINE CONNECTOR. THE VEHICLES ARE EXPERIENCING CORROSION AT THE 7-WAY TRAILER CONNECTION. THIS CAUSES INTERMITTENT FLASHING/FLICKERING OF THE TRAILER LIGHTS.

Risk: This could cause an electrical short and/or possible fire hazard.

Original NHTSA wording

THIS COULD CAUSE AN ELECTRICAL SHORT AND/OR POSSIBLE FIRE HAZARD.

Remedy & notes

Dealers will install the missing grommet on all affected chassis. If a connector is found defective, it will be replaced with a new connector. Owner notification is began on March 14, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact Kenworth at 1-425-828-5440.

Kenworth recall no. 03KW1. Customers can also contact the national highway traffic safety administration's auto safety hotline at 1-888-DASH-2-DOT (1-888-327-4236).

Fuel System

Nov 27, 2002 · NHTSA campaign 02V318001 · 16 vehicles

Problem: On certain trucks equipped with caterpillar 3126E hydraulically controlled electronically actuated unit injected diesel engines with high efficiency pumps (HEP8). The pump components May experience a high pressure seal failure which can result in a short period of rough running and subsequent engine stall due to a loss of injection actuation pressure.

Original NHTSA wording

ON CERTAIN TRUCKS EQUIPPED WITH CATERPILLAR 3126E HYDRAULICALLY CONTROLLED ELECTRONICALLY ACTUATED UNIT INJECTED DIESEL ENGINES WITH HIGH EFFICIENCY PUMPS (HEP8). THE PUMP COMPONENTS MAY EXPERIENCE A HIGH PRESSURE SEAL FAILURE WHICH CAN RESULT IN A SHORT PERIOD OF ROUGH RUNNING AND SUBSEQUENT ENGINE STALL DUE TO A LOSS OF INJECTION ACTUATION PRESSURE.

Risk: Once engine stall occurs, the engine cannot be restarted, increasing the risk of a crash.

Original NHTSA wording

ONCE ENGINE STALL OCCURS, THE ENGINE CANNOT BE RESTARTED, INCREASING THE RISK OF A CRASH.

Remedy & notes

Caterpillar is conducting the owner notification and remedy for this campaign. Dealers will inspect the pump serial numbers and replace the pump if necessary. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact caterpillar at 1-800-447-4986, or Kenworth at 425-828-5440, or Peterbilt at 940-591-4201.

Kenworth recall no. 02KW5/Peterbilt recall no. 1102C).also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-DASH-2-DOT (1-888-327-4236).

Service Brakes

Sep 10, 2002 · NHTSA campaign 02V241001 · 3,158 vehicles

Problem: On certain vehicles equipped with bendix tc-7 trailer control hand-operated valve with push-to-connect fittings. The delivery port in the valve body May be partially blocked due to a problem during the molding process.

Original NHTSA wording

ON CERTAIN VEHICLES EQUIPPED WITH BENDIX TC-7 TRAILER CONTROL HAND-OPERATED VALVE WITH PUSH-TO-CONNECT FITTINGS. THE DELIVERY PORT IN THE VALVE BODY MAY BE PARTIALLY BLOCKED DUE TO A PROBLEM DURING THE MOLDING PROCESS.

Risk: Such blockage May slow the delivery and exhaust of air to and from the trailer brakes when they are operated by this hand-operated trailer control valve.

Original NHTSA wording

SUCH BLOCKAGE MAY SLOW THE DELIVERY AND EXHAUST OF AIR TO AND FROM THE TRAILER BRAKES WHEN THEY ARE OPERATED BY THIS HAND-OPERATED TRAILER CONTROL VALVE.

Remedy & notes

Paccar will notify its customers and inspect and replace, if necessary, the hand valve free of charge. Owner notification began October 18, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact Peterbilt at 940-591-4201.

Also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-DASH-2-DOT (1-888-327-4236).

Recall text as published by NHTSA and the manufacturer.

2002 vs. other Kenworth T300 years

Owner complaints by model year; the darker bar is the 2002. Click a bar to switch year.

Questions

Does the 2002 Kenworth T300 have recalls?

Yes — NHTSA lists 4 recall campaigns covering the 2002 Kenworth T300, the latest from May 5, 2003 (trailer hitches). A recall applies to specific vehicles: enter your VIN at nhtsa.gov/recalls to see whether yours is affected and still open.

What are the most common problems with the 2002 Kenworth T300?

Few complaints have been filed with NHTSA for the 2002 Kenworth T300.