2011 Itasca Ellipse recalls and problems

The 2011 Itasca Ellipse has 4 recalls and 0 owner complaints on file with NHTSA.

How the 2011 compares

Too few model years with complaints to compare.

4recalls
0complaints
0crashes
0fires
0injuries
—median miles

Owner complaints filed with NHTSA, not verified and not adjusted for sales. Ranking compares this model's own years only.

Does your car have an open recall?
Recalls apply to specific vehicles. Only a VIN lookup on NHTSA's official site shows whether yours is affected and still unrepaired.
Check your VIN →

4 recalls

Electrical System

Dec 6, 2012 · NHTSA campaign 12V566000 · 1,521 vehicles

Problem: Winnebago Industries is recalling certain model year 2010-2013 Winnebago Journey and Tour motorhomes, and certain model year 2010-2013 Itasca Meridian and Ellipse motorhomes, manufactured June 18, 2010, through November 17, 2011. The chassis are equipped with connectors for diode jumpers that may come loose, resulting in an open circuit. Two circuits are affected: The one that disengages the cruise control with brake pedal use, and the one that illuminates the brake lights with brake pedal use.

Risk: Failure of the cruise control to disengage when the brakes are applied may increase the risk of a vehicle crash. Without the brake lights illuminating when the brakes are applied, the driver's intent is not communicated, increasing the risk of a crash.

Remedy & notes

Daimler Trucks North America will be conducting the recall on behalf of Winnebago Industries. Daimler will notify owners, and dealers will inspect the the diode jumpers to make sure they are fully locked in place and will correct the vehicles as needed. The recall began December 26, 2012. Owners should contact Winnebago at 1-641-585-3535 or Daimler Trucks at 1-503-745-6910.

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Equipment

Mar 8, 2011 · NHTSA campaign 11V156000 · 25 vehicles

Problem: Winnebago is recalling certain model year 2011 tour and Itasca ellipse motor homes manufactured from August 9, 2010 through January 21, 2011. These vehicles have the potential for a lp hose connection to be damaged when the slideout room is operated. If the lp hose makes contact with the slideout Ram, it could be disconnected. If this were to happen, a leak would occur when the lp tank is opened.

Original NHTSA wording

WINNEBAGO IS RECALLING CERTAIN MODEL YEAR 2011 TOUR AND ITASCA ELLIPSE MOTOR HOMES MANUFACTURED FROM AUGUST 9, 2010 THROUGH JANUARY 21, 2011. THESE VEHICLES HAVE THE POTENTIAL FOR A LP HOSE CONNECTION TO BE DAMAGED WHEN THE SLIDEOUT ROOM IS OPERATED. IF THE LP HOSE MAKES CONTACT WITH THE SLIDEOUT RAM, IT COULD BE DISCONNECTED. IF THIS WERE TO HAPPEN, A LEAK WOULD OCCUR WHEN THE LP TANK IS OPENED.

Risk: The leaking lp then has the potential to ignite, which could result in personal injury or death.

Original NHTSA wording

THE LEAKING LP THEN HAS THE POTENTIAL TO IGNITE, WHICH COULD RESULT IN PERSONAL INJURY OR DEATH.

Remedy & notes

Dealers will inspect the hose and relocate a pipe clamp as well as adding a second clamp to the hose to ensure clearance is maintained during the operation of the slideroom. This service will be performed free of charge. The safety recall began on March 25, 2011. Owner May contact Winnebago at 641-585-6939.

Winnebago safety recall no. 122.owners May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .

Equipment

Feb 14, 2011 · NHTSA campaign 11V096000 · 283 vehicles

Problem: Winnebago is recalling certain model year 2010-2011 tour and Itasca ellipse motor homes manufactured from August 7, 2009 through February 7, 2011, for failing to comply with the requirements of part 567, "certification." the vehicles are equipped with labels indicating the wrong type of load range tires.

Original NHTSA wording

WINNEBAGO IS RECALLING CERTAIN MODEL YEAR 2010-2011 TOUR AND ITASCA ELLIPSE MOTOR HOMES MANUFACTURED FROM AUGUST 7, 2009 THROUGH FEBRUARY 7, 2011, FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF PART 567, "CERTIFICATION." THE VEHICLES ARE EQUIPPED WITH LABELS INDICATING THE WRONG TYPE OF LOAD RANGE TIRES.

Risk: These vehicles do not comply with the requirements of part 567 certification.

Original NHTSA wording

THESE VEHICLES DO NOT COMPLY WITH THE REQUIREMENTS OF PART 567 CERTIFICATION.

Remedy & notes

Owners will be provided with new tire information labels and installation instructions. At the customer's option, a dealer can perform the installation for them. This service will be performed free of charge. The safety recall is expected to begin on February 25, 2011. Owner May contact Winnebago at 1-641-585-6939.

Winnebago safety recall no. 121.owners May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .

Equipment

Oct 26, 2010 · NHTSA campaign 10V525000 · 18,461 vehicles

Problem: Winnebago is recalling certain recreational vehicles equipped with 1200-SERIES norcold refrigerators. The population of refrigerators being addressed contains either a sensing algorithm or thermal switch to shut off power to the refrigerator when high temperatures are detected in order to prevent a potential fire. The response times of the sensor algorithm and thermal switch devices to stop power are not sufficient.

Original NHTSA wording

WINNEBAGO IS RECALLING CERTAIN RECREATIONAL VEHICLES EQUIPPED WITH 1200-SERIES NORCOLD REFRIGERATORS. THE POPULATION OF REFRIGERATORS BEING ADDRESSED CONTAINS EITHER A SENSING ALGORITHM OR THERMAL SWITCH TO SHUT OFF POWER TO THE REFRIGERATOR WHEN HIGH TEMPERATURES ARE DETECTED IN ORDER TO PREVENT A POTENTIAL FIRE. THE RESPONSE TIMES OF THE SENSOR ALGORITHM AND THERMAL SWITCH DEVICES TO STOP POWER ARE NOT SUFFICIENT.

Risk: The sensing algorithm or thermal switch installed to shut off power to the refrigerator when high temperatures are detected due to a possible hydrogen gas leak May not shut off in sufficient time to prevent a fire.

Original NHTSA wording

THE SENSING ALGORITHM OR THERMAL SWITCH INSTALLED TO SHUT OFF POWER TO THE REFRIGERATOR WHEN HIGH TEMPERATURES ARE DETECTED DUE TO A POSSIBLE HYDROGEN GAS LEAK MAY NOT SHUT OFF IN SUFFICIENT TIME TO PREVENT A FIRE.

Remedy & notes

Winnebago is working with norcold to identify and notify any affected owners. Owners will be instructed to contact norcold dealers to receive the remedy free of charge. Please see norcold's defect report 10E-049 for additional information. The recall began during December 2010. Owners May contact norcold at 1-800-767-9101 or Winnebago at 1-641-585-3535.

Owners May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .

Recall text as published by NHTSA and the manufacturer.

2011 vs. other Itasca Ellipse years

Owner complaints by model year; the darker bar is the 2011. Click a bar to switch year.

Questions

Does the 2011 Itasca Ellipse have recalls?

Yes — NHTSA lists 4 recall campaigns covering the 2011 Itasca Ellipse, the latest from Dec 6, 2012 (electrical system). A recall applies to specific vehicles: enter your VIN at nhtsa.gov/recalls to see whether yours is affected and still open.

What are the most common problems with the 2011 Itasca Ellipse?

Few complaints have been filed with NHTSA for the 2011 Itasca Ellipse.