2006 Freightliner Classic XL recalls and problems

The 2006 Freightliner Classic XL has 7 recalls and 0 owner complaints on file with NHTSA.

How the 2006 compares

Too few model years with complaints to compare.

7recalls
0complaints
0crashes
0fires
0injuries
—median miles

Owner complaints filed with NHTSA, not verified and not adjusted for sales. Ranking compares this model's own years only.

Does your car have an open recall?
Recalls apply to specific vehicles. Only a VIN lookup on NHTSA's official site shows whether yours is affected and still unrepaired.
Check your VIN →

7 recalls

Exterior Lighting

Apr 14, 2020 · NHTSA campaign 20V214000 · 63,175 vehicles

Problem: Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk: The vehicle's rearward visibility may be reduced, increasing the risk of a crash.

Remedy & notes

DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Steering

Oct 13, 2011 · NHTSA campaign 11V514000 · 9,689 vehicles

Problem: Daimler trucks is recalling certain model year 2005-2011 Freightliner cascadia, columbia, century, coronado, and classic xl trucks manufactured from November 1, 2004, through June 15, 2010 for the rack and pinion steering system. The lower pinion bearing May corrode and fail. A failed bearing May lead to damage of the spool valve seals. A damage spool valve seal May allow hydraulic fluid to flow to the right or left turn port instead of flowing to the return port.

Original NHTSA wording

DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2005-2011 FREIGHTLINER CASCADIA, COLUMBIA, CENTURY, CORONADO, AND CLASSIC XL TRUCKS MANUFACTURED FROM NOVEMBER 1, 2004, THROUGH JUNE 15, 2010 FOR THE RACK AND PINION STEERING SYSTEM. THE LOWER PINION BEARING MAY CORRODE AND FAIL. A FAILED BEARING MAY LEAD TO DAMAGE OF THE SPOOL VALVE SEALS. A DAMAGE SPOOL VALVE SEAL MAY ALLOW HYDRAULIC FLUID TO FLOW TO THE RIGHT OR LEFT TURN PORT INSTEAD OF FLOWING TO THE RETURN PORT.

Risk: The steering could unexpectedly turn left or right, making the vehicle more difficult to control and increasing the risk of a crash.

Original NHTSA wording

THE STEERING COULD UNEXPECTEDLY TURN LEFT OR RIGHT, MAKING THE VEHICLE MORE DIFFICULT TO CONTROL AND INCREASING THE RISK OF A CRASH.

Remedy & notes

Daimler trucks will inspect the lower bearing for corrosion. If corrosion is found, the rack and pinion system will be replaced. If no corrosion is found, on the bearing, the bearing will be packed with grease and the rubber bellows will be replaced with sealant added between the bellows and the rack housing. An interim letter was mailed in December 2011. Owners May contact daimler trucks toll-free at 1-800-547-0712.

Daimler trucks' safety recall number is fl-614.owners May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .

Trailer Hitches

Nov 13, 2007 · NHTSA campaign 07V530000 · 38,000 vehicles

Problem: On certain truck-tractors equipped with holland simplex se or se II fifth wheels, the latch lever pivot bolt assembly May have been over-tightened which could distort the pivot bolt spacer sleeve. Corrosion or contaminates in the pivot May cause it to bind and prevent the fifth wheel jaw from latching securely around the trailer king pin.

Original NHTSA wording

ON CERTAIN TRUCK-TRACTORS EQUIPPED WITH HOLLAND SIMPLEX SE OR SE II FIFTH WHEELS, THE LATCH LEVER PIVOT BOLT ASSEMBLY MAY HAVE BEEN OVER-TIGHTENED WHICH COULD DISTORT THE PIVOT BOLT SPACER SLEEVE. CORROSION OR CONTAMINATES IN THE PIVOT MAY CAUSE IT TO BIND AND PREVENT THE FIFTH WHEEL JAW FROM LATCHING SECURELY AROUND THE TRAILER KING PIN.

Risk: There is a possibility that the fifth wheel May fail to latch without the driver's knowledge. When the occurs, the driver could drive away and the trailer could become disengaged increasing the risk of a crash.

Original NHTSA wording

THERE IS A POSSIBILITY THAT THE FIFTH WHEEL MAY FAIL TO LATCH WITHOUT THE DRIVER'S KNOWLEDGE. WHEN THE OCCURS, THE DRIVER COULD DRIVE AWAY AND THE TRAILER COULD BECOME DISENGAGED INCREASING THE RISK OF A CRASH.

Remedy & notes

Dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer. The recall began on January 3, 2008. Owners May contact Freightliner at 1-800-547-0712.

Freightliner recall no. Fl-514.customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Steering

Sep 6, 2007 · NHTSA campaign 07V403000 · 450 vehicles

Problem: On certain trucks equipped with rack and pinion steering, the ball socket assembly at the inner end of the driver side tie rod May be damaged in a sharp turn. Excessive tie rod angles May loosen the tie rod in the ball socket or damage the threaded tie rod socket attachment to the steering rack on the driver side. The threaded end of the ball socket assembly May fracture and separate.

Original NHTSA wording

ON CERTAIN TRUCKS EQUIPPED WITH RACK AND PINION STEERING, THE BALL SOCKET ASSEMBLY AT THE INNER END OF THE DRIVER SIDE TIE ROD MAY BE DAMAGED IN A SHARP TURN. EXCESSIVE TIE ROD ANGLES MAY LOOSEN THE TIE ROD IN THE BALL SOCKET OR DAMAGE THE THREADED TIE ROD SOCKET ATTACHMENT TO THE STEERING RACK ON THE DRIVER SIDE. THE THREADED END OF THE BALL SOCKET ASSEMBLY MAY FRACTURE AND SEPARATE.

Risk: A fractured tie rod assembly will make the vehicle more difficult to control at higher speeds and a crash May occur.

Original NHTSA wording

A FRACTURED TIE ROD ASSEMBLY WILL MAKE THE VEHICLE MORE DIFFICULT TO CONTROL AT HIGHER SPEEDS AND A CRASH MAY OCCUR.

Remedy & notes

Dealers will change the front axle steering stops to prevent interference in the tie rod ball socket assembly and steering components will be replaced free of charge. The recall began on July 8, 2008, and will be mailed in phases through December 31, 2008. Owners May contact Freightliner at 1-800-547-0712.

Freightliner recall no. Fl-513. Customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Steering

Sep 5, 2007 · NHTSA campaign 07V400000 · 413 vehicles

Problem: On certain trucks equipped with rack and pinion steering, the tie rod arms May have been incorrectly installed. The threaded end of the ball socket assembly May fracture and separate.

Original NHTSA wording

ON CERTAIN TRUCKS EQUIPPED WITH RACK AND PINION STEERING, THE TIE ROD ARMS MAY HAVE BEEN INCORRECTLY INSTALLED. THE THREADED END OF THE BALL SOCKET ASSEMBLY MAY FRACTURE AND SEPARATE.

Risk: A fractured tie rod assembly will make the vehicle more difficult to control at higher speeds and a crash May occur.

Original NHTSA wording

A FRACTURED TIE ROD ASSEMBLY WILL MAKE THE VEHICLE MORE DIFFICULT TO CONTROL AT HIGHER SPEEDS AND A CRASH MAY OCCUR.

Remedy & notes

Dealers will inspect for installation of the steering arms. Steering components will be replaced on trucks that have incorrectly installed tie rod arms. The recall began on May 1, 2008. Owner May contact Freightliner at 1-800-547-0712.

Freightliner recall no. Fl-512.customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Service Brakes

Jul 16, 2007 · NHTSA campaign 07V302000 · 75,000 vehicles

Problem: Certain Freightliner school bus chassis, heavy trucks, and thomas built school buses manufactured between July 2002 and July 3, 2007, equipped with bendix sr-7 spring brake control valves. The parker scv brass 90 degree single check valves (scv) which attach to the supply port of a bendix sr-7 spring brake modulating valve can break apart. Pieces of the parker scv can become lodged inside the sr-7 spring brake modulating valve, potentially causing either leakage out of the sr-7 valve or preventing air from properly exhausting from the sr-7 valve. Also, due to a manufacturing defect in the internal rubber check valve inside the sr-7 spring brake modulating valves, the valves can become deformed and not seat properly.

Original NHTSA wording

CERTAIN FREIGHTLINER SCHOOL BUS CHASSIS, HEAVY TRUCKS, AND THOMAS BUILT SCHOOL BUSES MANUFACTURED BETWEEN JULY 2002 AND JULY 3, 2007, EQUIPPED WITH BENDIX SR-7 SPRING BRAKE CONTROL VALVES. THE PARKER SCV BRASS 90 DEGREE SINGLE CHECK VALVES (SCV) WHICH ATTACH TO THE SUPPLY PORT OF A BENDIX SR-7 SPRING BRAKE MODULATING VALVE CAN BREAK APART. PIECES OF THE PARKER SCV CAN BECOME LODGED INSIDE THE SR-7 SPRING BRAKE MODULATING VALVE, POTENTIALLY CAUSING EITHER LEAKAGE OUT OF THE SR-7 VALVE OR PREVENTING AIR FROM PROPERLY EXHAUSTING FROM THE SR-7 VALVE. ALSO, DUE TO A MANUFACTURING DEFECT IN THE INTERNAL RUBBER CHECK VALVE INSIDE THE SR-7 SPRING BRAKE MODULATING VALVES, THE VALVES CAN BECOME DEFORMED AND NOT SEAT PROPERLY.

Risk: These conditions could either result in leakage and cause a delay in the application of the spring brake without warning or possibly lead to unintended vehicle rollaway or brake drag which could result in a vehicle crash, personal injury, or death.

Original NHTSA wording

THESE CONDITIONS COULD EITHER RESULT IN LEAKAGE AND CAUSE A DELAY IN THE APPLICATION OF THE SPRING BRAKE WITHOUT WARNING OR POSSIBLY LEAD TO UNINTENDED VEHICLE ROLLAWAY OR BRAKE DRAG WHICH COULD RESULT IN A VEHICLE CRASH, PERSONAL INJURY, OR DEATH.

Remedy & notes

Freightliner will notify owners and repair the vehicles free of charge. The recall began on January 11, 2008 to Freightliner, sterling, and Freightliner custom chassis owners; to thomas built bus owners on February 1, 2008. Owners can contact Freightliner at 1-800-547-0712.

Freightliner recall no. Fl-504.customers May contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

Engine

Feb 8, 2006 · NHTSA campaign 06V030000 · 5,771 vehicles

Problem: On certain trucks equipped with caterpillar diesel engines, the variable valve actuation oil line May wear against the sharp edge of the cylinder head if not positioned correctly.

Original NHTSA wording

ON CERTAIN TRUCKS EQUIPPED WITH CATERPILLAR DIESEL ENGINES, THE VARIABLE VALVE ACTUATION OIL LINE MAY WEAR AGAINST THE SHARP EDGE OF THE CYLINDER HEAD IF NOT POSITIONED CORRECTLY.

Risk: The oil line May be cut on the cylinder head causing an oil leak and a possible fire.

Original NHTSA wording

THE OIL LINE MAY BE CUT ON THE CYLINDER HEAD CAUSING AN OIL LEAK AND A POSSIBLE FIRE.

Remedy & notes

Caterpillar, in conjunction with Freightliner, will be conducting the owner notification and remedy for this campaign free of charge. Owners May call caterpillar at 309-675-6496, or Freightliner at 1-800-547-0712.

Freightliner recall no. Fl-471.customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Recall text as published by NHTSA and the manufacturer.

NHTSA investigations

INSECURE FIFTH WHEEL LATCHING

PE07047 · opened Sep 14, 2007 · closed Nov 19, 2007 · led to recall 07V530000
Summary

ON NOVEMBER 19, 2007, FREIGHTLINER FILED DEFECT REPORT 07V-530 WHICH OUTLINES A SAFETY RECALL PROGRAM TO NOTIFY THE AFFECTED OWNERS AND CORRECT THE AFFECTED VEHICLES.

2006 vs. other Freightliner Classic XL years

Owner complaints by model year; the darker bar is the 2006. Click a bar to switch year.

Questions

Does the 2006 Freightliner Classic XL have recalls?

Yes — NHTSA lists 7 recall campaigns covering the 2006 Freightliner Classic XL, the latest from Apr 14, 2020 (exterior lighting). A recall applies to specific vehicles: enter your VIN at nhtsa.gov/recalls to see whether yours is affected and still open.

What are the most common problems with the 2006 Freightliner Classic XL?

Few complaints have been filed with NHTSA for the 2006 Freightliner Classic XL.