2008 Four Winds Presidio 360 recalls and problems

The 2008 Four Winds Presidio 360 has 3 recalls and 0 owner complaints on file with NHTSA.

How the 2008 compares

Too few model years with complaints to compare.

3recalls
0complaints
0crashes
0fires
0injuries
—median miles

Owner complaints filed with NHTSA, not verified and not adjusted for sales. Ranking compares this model's own years only.

Does your car have an open recall?
Recalls apply to specific vehicles. Only a VIN lookup on NHTSA's official site shows whether yours is affected and still unrepaired.
Check your VIN →

3 recalls

Suspension

Jul 11, 2008 · NHTSA campaign 08V335000 · 69 vehicles

Problem: Four Winds is recalling certain my 2008-2009 motor home chassis equipped with saf-holland adl series rear suspensions. In some instances the transverse beam was not properly welded which could result in a failure of the weld.

Original NHTSA wording

FOUR WINDS IS RECALLING CERTAIN MY 2008-2009 MOTOR HOME CHASSIS EQUIPPED WITH SAF-HOLLAND ADL SERIES REAR SUSPENSIONS. IN SOME INSTANCES THE TRANSVERSE BEAM WAS NOT PROPERLY WELDED WHICH COULD RESULT IN A FAILURE OF THE WELD.

Risk: If the weld fails, vehicle stability while cornering could be affected resulting in loss of vehicle control, possibly resulting in a crash. In addition, the transverse beam could drop to the ground causing sparks that could cause a fire hazard.

Original NHTSA wording

IF THE WELD FAILS, VEHICLE STABILITY WHILE CORNERING COULD BE AFFECTED RESULTING IN LOSS OF VEHICLE CONTROL, POSSIBLY RESULTING IN A CRASH. IN ADDITION, THE TRANSVERSE BEAM COULD DROP TO THE GROUND CAUSING SPARKS THAT COULD CAUSE A FIRE HAZARD.

Remedy & notes

Four Winds is working with daimler trucks and saf-holland to have a visual inspection of the adl transverse beam performed. If a weld defect is identified, saf-holland will provide a service replacement kit that contains a new transverse beam, all necessary installation hardware, beam replacement, and instructions free of charge (please see 08E031 and 08V269). Owners May contact saf-holland at 1-231-773-3271, daimler trucks at 1-800-547-0712, or Four Winds at 1-800-860-5658.

Customers May contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

Service Brakes

Jan 28, 2008 · NHTSA campaign 08V034000 · 21 vehicles

Problem: On certain motor homes built on Freightliner chassis and equipped with bendix sr-7 spring brake modulating valves, the internal rubber check valve May leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button.

Original NHTSA wording

ON CERTAIN MOTOR HOMES BUILT ON FREIGHTLINER CHASSIS AND EQUIPPED WITH BENDIX SR-7 SPRING BRAKE MODULATING VALVES, THE INTERNAL RUBBER CHECK VALVE MAY LEAK CAUSING A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER THE OPERATOR PULLS THE DASH VALVE BUTTON.

Risk: This could cause a delay or failure in applying the parking brakes which could result in a vehicle roll away, increasing the risk of a crash.

Original NHTSA wording

THIS COULD CAUSE A DELAY OR FAILURE IN APPLYING THE PARKING BRAKES WHICH COULD RESULT IN A VEHICLE ROLL AWAY, INCREASING THE RISK OF A CRASH.

Remedy & notes

Four Winds is working with Freightliner and bendix to repair these vehicles (please see 07V302 and 07E037). Bendix will install a check valve repair kit for the affected sr-7 spring brake modulating valve free of charge. Owners May contact Freightliner at 1-800-547-0712, bendix at 1-440-329-9000 or Four Winds at 1-574-266-1111.

Customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Steering

Jan 9, 2008 · NHTSA campaign 08V009000 · 55 vehicles

Problem: On certain motor homes built on Freightliner chassis and equipped with axle alliance company (aac) front axles, the fasteners that attach the steering arm or tie rod arms to the spindle May be over or under tightened.

Original NHTSA wording

ON CERTAIN MOTOR HOMES BUILT ON FREIGHTLINER CHASSIS AND EQUIPPED WITH AXLE ALLIANCE COMPANY (AAC) FRONT AXLES, THE FASTENERS THAT ATTACH THE STEERING ARM OR TIE ROD ARMS TO THE SPINDLE MAY BE OVER OR UNDER TIGHTENED.

Risk: Incorrectly torqued steering arm fasteners May fatigue and fracture which could cause a crash without warning.

Original NHTSA wording

INCORRECTLY TORQUED STEERING ARM FASTENERS MAY FATIGUE AND FRACTURE WHICH COULD CAUSE A CRASH WITHOUT WARNING.

Remedy & notes

Four Winds will be working with Freightliner to repair these vehicles. Owners can contact Freightliner at 1-800-547-0712 or Four Winds at 1-574-266-1111.

Customers May contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

Recall text as published by NHTSA and the manufacturer.

2008 vs. other Four Winds Presidio 360 years

Owner complaints by model year; the darker bar is the 2008. Click a bar to switch year.

Questions

Does the 2008 Four Winds Presidio 360 have recalls?

Yes — NHTSA lists 3 recall campaigns covering the 2008 Four Winds Presidio 360, the latest from Jul 11, 2008 (suspension). A recall applies to specific vehicles: enter your VIN at nhtsa.gov/recalls to see whether yours is affected and still open.

What are the most common problems with the 2008 Four Winds Presidio 360?

Few complaints have been filed with NHTSA for the 2008 Four Winds Presidio 360.