2006 Four Winds Magellan recalls and problems

The 2006 Four Winds Magellan has 4 recalls and 0 owner complaints on file with NHTSA.

How the 2006 compares

Too few model years with complaints to compare.

4recalls

0complaints

0crashes

0fires

0injuries

—median miles

Owner complaints filed with NHTSA, not verified and not adjusted for sales. Ranking compares this model's own years only.

Does your car have an open recall?
Recalls apply to specific vehicles. Only a VIN lookup on NHTSA's official site shows whether yours is affected and still unrepaired.

Check your VIN →

4 recalls

Service Brakes

Jun 10, 2009 · NHTSA campaign 09V204000 · 684 vehicles

Problem: Four Winds is recalling 684 my 2002-2006 infinity, my 2002-2007 windesport, my 2004-2008 hurricane, my 2006-2007 megallan and my 2008 fun mover motor homes equipped with axles that include Bosch zops or zoht pin slide hydraulic disc brakes. When combined with occasional or seasonal vehicle operation May experience calipers sticking in the applied position. This can result in abnormal heat generation at the wheel end causing brake drag. The driver would normally have warning of the brake drag if undetected by the driver.

Original NHTSA wording

FOUR WINDS IS RECALLING 684 MY 2002-2006 INFINITY, MY 2002-2007 WINDESPORT, MY 2004-2008 HURRICANE, MY 2006-2007 MEGALLAN AND MY 2008 FUN MOVER MOTOR HOMES EQUIPPED WITH AXLES THAT INCLUDE BOSCH ZOPS OR ZOHT PIN SLIDE HYDRAULIC DISC BRAKES. WHEN COMBINED WITH OCCASIONAL OR SEASONAL VEHICLE OPERATION MAY EXPERIENCE CALIPERS STICKING IN THE APPLIED POSITION. THIS CAN RESULT IN ABNORMAL HEAT GENERATION AT THE WHEEL END CAUSING BRAKE DRAG. THE DRIVER WOULD NORMALLY HAVE WARNING OF THE BRAKE DRAG IF UNDETECTED BY THE DRIVER.

Risk: The driver would normally detect the brake drag but if undetected the temperature increase at the wheel end can eventually lead to soft pedal conditions due to brake fluid boil, and possible extended stopping distance increasing the risk of a crash.

Original NHTSA wording

THE DRIVER WOULD NORMALLY DETECT THE BRAKE DRAG BUT IF UNDETECTED THE TEMPERATURE INCREASE AT THE WHEEL END CAN EVENTUALLY LEAD TO SOFT PEDAL CONDITIONS DUE TO BRAKE FLUID BOIL, AND POSSIBLE EXTENDED STOPPING DISTANCE INCREASING THE RISK OF A CRASH.

Remedy & notes

Dealers will inspect and replace the necessary components free of charge. Workhorse is handling the remedy for this campaign please see 09V-110. Workhorse will conduct the owner and dealer notification. Owners May contact Workhorse at 1-877-246-7731.

Owners May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to <a href=http://www.safercar.gov>http://www.safercar.gov</a> .

Engine

Sep 13, 2006 · NHTSA campaign 06V351000 · 692 vehicles

Problem: On certain motor homes built on Workhorse chassis and equipped with gm 8.1L V8 engines, improper hardening during the heat treatment process can cause the fuel rail pulse damper retainer clip to fracture, resulting in inadequate retention of the damper. If the damper becomes loose, fuel could be pumped by the fuel pump into the under hood area.

Original NHTSA wording

ON CERTAIN MOTOR HOMES BUILT ON WORKHORSE CHASSIS AND EQUIPPED WITH GM 8.1L V8 ENGINES, IMPROPER HARDENING DURING THE HEAT TREATMENT PROCESS CAN CAUSE THE FUEL RAIL PULSE DAMPER RETAINER CLIP TO FRACTURE, RESULTING IN INADEQUATE RETENTION OF THE DAMPER. IF THE DAMPER BECOMES LOOSE, FUEL COULD BE PUMPED BY THE FUEL PUMP INTO THE UNDER HOOD AREA.

Risk: In the presence of an ignition source, a fire could result.

Original NHTSA wording

IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD RESULT.

Remedy & notes

Chevrolet and Workhorse are handling the owner notification and remedy for this campaign (please see 06V225 and 06V289). Dealers will replace the fuel rail pulse damper retainer clips on these engines free of charge. Owners May contact Chevrolet at 1-800-630-2438, Workhorse at 877-294-6773 or thor industries at 937-596-6849.

Customers can also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Steering

Jul 12, 2006 · NHTSA campaign 06V256000 · 70 vehicles

Problem: Certain chassis May have been equipped with incorrect steering intermediate shafts. The spline can strip while the steering wheel is being turned.

Original NHTSA wording

CERTAIN CHASSIS MAY HAVE BEEN EQUIPPED WITH INCORRECT STEERING INTERMEDIATE SHAFTS. THE SPLINE CAN STRIP WHILE THE STEERING WHEEL IS BEING TURNED.

Risk: This steering condition could result in a loss of steering control, increasing the risk of a crash.

Original NHTSA wording

THIS STEERING CONDITION COULD RESULT IN A LOSS OF STEERING CONTROL, INCREASING THE RISK OF A CRASH.

Remedy & notes

Workhorse is conducting this recall (please see 06V148). They will inspect and, if necessary, replace the steering intermediate shaft free of charge. Owners May contact Workhorse at 1-877-294-6773 or Four Winds at 1-937-492-1271.

Customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Trailer Hitches

Oct 6, 2005 · NHTSA campaign 05V465000 · 221 vehicles

Problem: On certain class a and class b motor homes, the hitch May have been manufactured with a spacer plate that does not fit flush to the rear extension.

Original NHTSA wording

ON CERTAIN CLASS A AND CLASS B MOTOR HOMES, THE HITCH MAY HAVE BEEN MANUFACTURED WITH A SPACER PLATE THAT DOES NOT FIT FLUSH TO THE REAR EXTENSION.

Risk: This causes the fasteners to be corner loaded when tightened which could cause the hitch to fail during usage causing a crash which could result in death and injury.

Original NHTSA wording

THIS CAUSES THE FASTENERS TO BE CORNER LOADED WHEN TIGHTENED WHICH COULD CAUSE THE HITCH TO FAIL DURING USAGE CAUSING A CRASH WHICH COULD RESULT IN DEATH AND INJURY.

Remedy & notes

Dealers will install a new spacer plate and add six new bolts, washers and nuts to secure the spacer plate in place. The recall began on November 11, 2005. Owners May contact Four Winds at 574-266-1111.

Customers May also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

Recall text as published by NHTSA and the manufacturer.

2006 vs. other Four Winds Magellan years

Owner complaints by model year; the darker bar is the 2006. Click a bar to switch year.

Questions

Does the 2006 Four Winds Magellan have recalls?

Yes — NHTSA lists 4 recall campaigns covering the 2006 Four Winds Magellan, the latest from Jun 10, 2009 (service brakes). A recall applies to specific vehicles: enter your VIN at nhtsa.gov/recalls to see whether yours is affected and still open.

What are the most common problems with the 2006 Four Winds Magellan?

Few complaints have been filed with NHTSA for the 2006 Four Winds Magellan.