2020 Ford Escape Hybrid recalls and problems

On July 7, 2023, the Office of Defects Investigation (ODI) opened PE23-013 to investigate instances of check arm bracket failure in the front doors in model year (MY) 2020-2021 Ford Escape vehicles. At the time of opening, ODI received 118 Vehicle Owner Questionnaires (VOQs) alleging this failure. To date, ODI has received 593 VOQs alleging this failure, with a variety of reported failure conditions. The most common reported failure condition was reduced door functionality (e.g. door was more difficult to open or close) and the least common was inadvertent door opening. Other reported failure conditions include inability to latch and inability to open. Three VOQs reported injuries, one of which requiring medical attention. ODI conducted a consumer survey which yielded an additional 44 injuries (although the VOQs did not indicate any injury), none of which requiring medical attention. All these injuries were bumps/bruises from the door closing on occupants’ arms and legs while entering and exiting the vehicle. The function of the check arm system is to provide hold-open assist at specific angles and to assist with door closing energy. It does not provide vertical support of the door and is independent of the latching mechanism. This failure is progressive and detectable by vehicle occupants. Consumers commonly report hearing a popping or snapping noise when opening and closing the door. This noise is caused by some of the welds between the bracket and door structure failing …

NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.