2000 BMW K1200lt recalls and problems

The Office of Defects Investigation (ODI) received a defect petition requesting that it open an investigation into model year (MY) 1998-2009 BMW KLT series motorcycles for final drive bearing failures.The petitioner asked NHTSA to issue an order that [BMW] be required to recall the affected models for inspection ofcomponent wear and proper assembly of the [final drive] bearing.ODI has reviewed the petition, assessed relevant consumer complaints, and gathered other data in the course of investigating this issue.Based on its review, ODI does not believe that a safety-related defect trend currently exists for final drive bearing failures in the subject motorcycles.Therefore, in view of the need to allocate and prioritize NHTSA's limited resources to accomplish the agency's safety mission, the petition is denied.However, the agency will continue to monitor information related to this issue and will take further action if warranted.For detailed information, see the Federal Register notice: https://federalregister.gov/a/2013-13779.

BMW IS CONDUCTING A RECALL (04V-028).AN INFORMATION REQUEST(IR)RESPONSE WAS NOT RECEIVED. UPON BMW'S RECEIPT OF THE IR, AND AFTER DISCUSSIONS WITH ODI, BMWDETERMINED THAT A RECALL WAS NECESSARY. ON CERTAIN MOTORCYCLES, THE O-RING CONTAINED WITHIN THE FUEL LINE QUICK-DISCONNECT COUPLING COULD BECOME DAMAGED.FURTHER, THERE IS ALSO A PROBLEM INVOLVING CRIMP-TYPE HOSE CLAMPS, WHICH CAN ALSO RESULT IN A SMALL FUEL LEAK.DEALERS WILL INSPECT, AND IF NECESSARY, ADJUST ALL CRIMP-TYPE HOSE CLAMPS.ALSO ALL FUEL LINE QUICK-DISCONNECT COUPLINGS WILL BE INSPECTED.IF A LEAK IS DETECTED, THE QUICK-DISCONNECT O-RING WILL BE REPLACED.IF DAMAGED, THE COUPLING WILL BE REPLACED.OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING FEBRUARY 2004.